Lihat spesifikasi untuk detail produk.
XC6121C643MR-G
Product Overview
Category
XC6121C643MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
XC6121C643MR-G comes in a small surface-mount package.
Essence
The essence of XC6121C643MR-G is to provide stable and regulated voltage for electronic devices.
Packaging/Quantity
It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121C643MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6121C643MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It shuts down automatically to prevent damage due to excessive heat.
- Short-circuit protection: XC6121C643MR-G safeguards against short-circuits, preventing damage to the circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic devices.
- Low dropout voltage allows for efficient power utilization.
- Low quiescent current minimizes power consumption in standby mode.
- Thermal shutdown protection prevents overheating and damage to the regulator.
- Short-circuit protection safeguards the circuit from potential damage.
Disadvantages
- Limited input voltage range (2.5V - 6.0V) may not be suitable for all applications.
- Output voltage range (1.2V - 5.5V) may not cover all required voltage levels.
Working Principles
XC6121C643MR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. This ensures that the output voltage remains stable even when the input voltage or load conditions change.
Detailed Application Field Plans
XC6121C643MR-G is commonly used in various electronic devices, including:
- Mobile phones
- Tablets
- Portable media players
- Digital cameras
- Wireless communication devices
It is particularly useful in battery-powered devices where stable voltage regulation is crucial for optimal performance.
Detailed and Complete Alternative Models
Some alternative models to XC6121C643MR-G include:
- XC6206P332MR-G: Similar voltage regulator with a different package and slightly different specifications.
- XC6220B332MR-G: Voltage regulator with similar characteristics but a higher input voltage range.
- XC6219B332MR-G: Voltage regulator with similar characteristics but a lower dropout voltage.
These alternative models can be considered based on specific application requirements and compatibility with the existing circuit design.
Word count: 489 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6121C643MR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6121C643MR-G in technical solutions:
Q1: What is XC6121C643MR-G? A1: XC6121C643MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of XC6121C643MR-G? A2: The operating voltage range of XC6121C643MR-G is from 0.8V to 6.0V.
Q3: What is the typical quiescent current consumption of XC6121C643MR-G? A3: The typical quiescent current consumption of XC6121C643MR-G is 1.0µA.
Q4: How does XC6121C643MR-G detect undervoltage conditions? A4: XC6121C643MR-G detects undervoltage conditions by comparing the input voltage with a fixed internal reference voltage. When the input voltage drops below the threshold, it triggers the output signal.
Q5: Can XC6121C643MR-G be used in battery-powered applications? A5: Yes, XC6121C643MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q6: What is the output configuration of XC6121C643MR-G? A6: XC6121C643MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.
Q7: What is the maximum output sink current of XC6121C643MR-G? A7: The maximum output sink current of XC6121C643MR-G is 10mA.
Q8: Can XC6121C643MR-G be used in automotive applications? A8: Yes, XC6121C643MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q9: Does XC6121C643MR-G have built-in hysteresis? A9: Yes, XC6121C643MR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillation and provide stable voltage monitoring.
Q10: What is the package type of XC6121C643MR-G? A10: XC6121C643MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.
Please note that these answers are based on general information and specifications. It is always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.