Lihat spesifikasi untuk detail produk.
XC6121C444MR-G
Product Overview
Category
XC6121C444MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 150mA
- Low Dropout Voltage: 200mV (at 100mA)
- Package Type: SOT-23-5
- Operating Temperature Range: -40°C to +85°C
Package and Quantity
XC6121C444MR-G is available in a SOT-23-5 package. It is typically sold in reels or tubes containing a specific quantity, such as 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (at 100mA)
- Quiescent Current: 35µA (typical)
- Line Regulation: ±0.3% (typical)
- Load Regulation: ±0.5% (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The XC6121C444MR-G has a total of five pins:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
- CE: Capacitor connection pin for stability
Functional Features
- Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
- Excellent line and load regulation characteristics provide stable output voltage under varying conditions.
- Low quiescent current minimizes power consumption in standby or low-load situations.
- Built-in overcurrent protection safeguards the device and the connected circuitry.
Advantages
- Wide input voltage range allows for versatile applications.
- Compact SOT-23-5 package enables space-saving designs.
- Low dropout voltage ensures efficient power conversion.
- Good line and load regulation characteristics provide stable output voltage.
- Overcurrent protection enhances system reliability.
Disadvantages
- Maximum output current of 150mA may not be sufficient for high-power applications.
- Limited operating temperature range (-40°C to +85°C) may restrict usage in extreme environments.
Working Principles
The XC6121C444MR-G is a linear voltage regulator that utilizes a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a constant output voltage. The enable pin (EN) can be used to turn the regulator on or off.
Application Field Plans
The XC6121C444MR-G is commonly used in various electronic devices and systems, including:
- Portable consumer electronics: smartphones, tablets, portable media players.
- Industrial control systems: sensors, actuators, motor control circuits.
- Automotive electronics: infotainment systems, lighting control, power management.
- IoT devices: smart home automation, wearable devices, wireless sensor networks.
- Medical equipment: patient monitoring devices, diagnostic instruments, medical imaging systems.
Alternative Models
There are several alternative models available in the market that offer similar functionality to the XC6121C444MR-G. Some notable alternatives include:
- LM1117-3.3: A popular voltage regulator with a fixed 3.3V output voltage.
- MCP1700-3302E: Low quiescent current regulator with a fixed 3.3V output voltage.
- LT1763-3.3: High-performance regulator with low dropout voltage and fixed 3.3V output.
These alternative models can be considered based on specific application requirements and design constraints.
In conclusion, the XC6121C444MR-G is a voltage regulator that offers efficient voltage regulation, compact packaging, and versatile applications. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models make it a valuable component in various electronic systems.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6121C444MR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6121C444MR-G in technical solutions:
Q1: What is XC6121C444MR-G? A1: XC6121C444MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121C444MR-G? A2: The operating voltage range of XC6121C444MR-G is from 0.8V to 6.0V.
Q3: What is the output type of XC6121C444MR-G? A3: XC6121C444MR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate the status of the monitored voltage.
Q4: What is the typical quiescent current consumption of XC6121C444MR-G? A4: The typical quiescent current consumption of XC6121C444MR-G is around 1.0µA, making it suitable for low-power applications.
Q5: Can XC6121C444MR-G detect both overvoltage and undervoltage conditions? A5: No, XC6121C444MR-G is specifically designed to detect undervoltage conditions only.
Q6: What is the accuracy of the undervoltage detection threshold in XC6121C444MR-G? A6: The accuracy of the undervoltage detection threshold in XC6121C444MR-G is typically ±2%.
Q7: How does XC6121C444MR-G indicate an undervoltage condition? A7: When an undervoltage condition is detected, the output of XC6121C444MR-G is pulled low (active low), indicating the fault condition.
Q8: Can XC6121C444MR-G be used in automotive applications? A8: Yes, XC6121C444MR-G is AEC-Q100 qualified and suitable for automotive applications.
Q9: What is the temperature range of XC6121C444MR-G? A9: The operating temperature range of XC6121C444MR-G is from -40°C to +85°C.
Q10: Is XC6121C444MR-G available in a surface-mount package? A10: Yes, XC6121C444MR-G is available in a compact SOT-25 package, which is commonly used for surface-mount applications.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.