Lihat spesifikasi untuk detail produk.
XC6121C441ER-G
Product Overview
Category
XC6121C441ER-G belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.8V to 5.5V
- Maximum Output Current: 150mA
- Low Dropout Voltage: 200mV (at 100mA)
- Low Quiescent Current: 30µA (typical)
- Package Type: SOT-23-5
- Operating Temperature Range: -40°C to +85°C
Packaging/Quantity
XC6121C441ER-G is typically packaged in reels, with 3000 units per reel.
Specifications
- Dropout Voltage: 200mV (at 100mA)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.3% (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Output Noise Voltage: 30µVrms (typical)
Detailed Pin Configuration
The XC6121C441ER-G has a total of five pins:
- VIN: Input voltage pin.
- GND: Ground pin.
- CE: Chip enable pin.
- VOUT: Output voltage pin.
- NC: No connection pin.
Functional Features
- Low dropout voltage ensures efficient power conversion.
- Wide input voltage range allows for versatile applications.
- Low quiescent current minimizes power consumption.
- Excellent line and load regulation for stable output voltage.
- High ripple rejection ratio reduces noise interference.
- Compact SOT-23-5 package for space-constrained designs.
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient power conversion. - Wide input voltage range allows for versatile applications. - Low quiescent current minimizes power consumption.
Disadvantages: - Maximum output current limited to 150mA. - SOT-23-5 package may be challenging for manual soldering.
Working Principles
XC6121C441ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6121C441ER-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to XC6121C441ER-G are: - XC6121C331ER-G - XC6121C221ER-G - XC6121C111ER-G - XC6121C551ER-G
These models have similar specifications and pin configurations, providing flexibility in design choices.
Word count: 345 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6121C441ER-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6121C441ER-G in technical solutions:
Q1: What is XC6121C441ER-G? A1: XC6121C441ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121C441ER-G? A2: The operating voltage range of XC6121C441ER-G is from 0.8V to 6.0V.
Q3: What is the output type of XC6121C441ER-G? A3: XC6121C441ER-G has an open-drain output type.
Q4: What is the typical quiescent current of XC6121C441ER-G? A4: The typical quiescent current of XC6121C441ER-G is 1.0µA.
Q5: What is the hysteresis voltage of XC6121C441ER-G? A5: The hysteresis voltage of XC6121C441ER-G is typically 0.1V.
Q6: Can XC6121C441ER-G be used for overvoltage detection? A6: No, XC6121C441ER-G is specifically designed for undervoltage detection only.
Q7: What is the maximum reset time delay of XC6121C441ER-G? A7: The maximum reset time delay of XC6121C441ER-G is typically 200ms.
Q8: Is XC6121C441ER-G suitable for automotive applications? A8: Yes, XC6121C441ER-G is AEC-Q100 qualified, making it suitable for automotive applications.
Q9: Can XC6121C441ER-G operate in a wide temperature range? A9: Yes, XC6121C441ER-G has an operating temperature range of -40°C to +105°C.
Q10: What is the package type of XC6121C441ER-G? A10: XC6121C441ER-G is available in a SOT-25 package.
Please note that these answers are based on general information and specifications. It is always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.