Lihat spesifikasi untuk detail produk.
XC6121C240ER-G
Product Overview
Category
XC6121C240ER-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
XC6121C240ER-G is available in a small SOT-23-5 package.
Essence
The essence of XC6121C240ER-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
It is typically packaged in reels, with each reel containing a specific quantity of XC6121C240ER-G units.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.4V
- Output Current: Up to 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121C240ER-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- NC (No Connection)
- VOUT (Output Voltage)
- EN (Enable)
Functional Features
- High Precision Regulation: XC6121C240ER-G provides precise voltage regulation, ensuring stable performance of connected devices.
- Low Dropout Voltage: The low dropout voltage minimizes power loss and improves overall efficiency.
- Low Quiescent Current: With low quiescent current, the regulator consumes minimal power during standby or idle mode.
- Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent overheating and potential damage.
- Short-Circuit Protection: XC6121C240ER-G is equipped with short-circuit protection, safeguarding the circuit from damage in case of a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance.
- Low dropout voltage minimizes power loss.
- Low quiescent current reduces power consumption during standby.
- Thermal shutdown protection prevents overheating.
- Short-circuit protection safeguards the circuit.
Disadvantages
- Limited output current capacity (up to 150mA).
- Restricted input voltage range (2.5V - 6.0V).
Working Principles
XC6121C240ER-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance within the regulator to maintain a constant output voltage, compensating for any fluctuations in the input voltage or load conditions.
Detailed Application Field Plans
XC6121C240ER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6121C240ER-G are: - XC6121C240ER-G-7 - XC6121C240ER-G-8 - XC6121C240ER-G-9 - XC6121C240ER-G-10
These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable voltage regulator for specific requirements.
Word count: 413 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6121C240ER-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6121C240ER-G in technical solutions:
Q1: What is XC6121C240ER-G? A1: XC6121C240ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of XC6121C240ER-G? A2: The operating voltage range of XC6121C240ER-G is from 0.8V to 6.0V.
Q3: What is the typical voltage detection accuracy of XC6121C240ER-G? A3: The typical voltage detection accuracy of XC6121C240ER-G is ±1.5%.
Q4: How much current does XC6121C240ER-G consume during operation? A4: XC6121C240ER-G has a low quiescent current consumption of typically 1.0µA.
Q5: Can XC6121C240ER-G be used for overvoltage protection? A5: No, XC6121C240ER-G is specifically designed for undervoltage detection. It does not provide overvoltage protection.
Q6: What is the output configuration of XC6121C240ER-G? A6: XC6121C240ER-G has an open-drain output configuration, which requires an external pull-up resistor.
Q7: What is the maximum output sink current of XC6121C240ER-G? A7: The maximum output sink current of XC6121C240ER-G is 50mA.
Q8: Can XC6121C240ER-G be used in automotive applications? A8: Yes, XC6121C240ER-G is AEC-Q100 qualified and suitable for automotive applications.
Q9: Does XC6121C240ER-G have built-in hysteresis? A9: Yes, XC6121C240ER-G has a built-in hysteresis of typically 50mV to prevent output oscillation near the detection threshold.
Q10: What is the package type of XC6121C240ER-G? A10: XC6121C240ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult the manufacturer for specific details and application requirements.