XC6119N29ANR-G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage regulation and power management.
XC6119N29ANR-G is available in a small surface-mount package, typically measuring 3mm x 3mm.
The essence of XC6119N29ANR-G lies in its ability to regulate voltage and efficiently manage power in electronic devices.
This product is usually packaged in reels or tubes, with a typical quantity of 3000 units per reel.
XC6119N29ANR-G has the following pin configuration:
XC6119N29ANR-G utilizes internal circuitry to monitor and adjust the output voltage based on the input voltage. It employs a feedback mechanism to maintain a stable output voltage, compensating for variations in the input voltage.
XC6119N29ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices
Some alternative models that can be considered as alternatives to XC6119N29ANR-G are: - XC6119N28ANR-G: Output voltage of 2.8V - XC6119N30ANR-G: Output voltage of 3.0V - XC6119N27ANR-G: Output voltage of 2.7V
These alternative models offer similar functionality with slight variations in the output voltage.
Note: The content provided above is approximately 350 words. Additional information or details can be added to meet the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of XC6119N29ANR-G in technical solutions:
1. What is XC6119N29ANR-G? XC6119N29ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage drops below a certain threshold.
2. What is the operating voltage range of XC6119N29ANR-G? The operating voltage range of XC6119N29ANR-G is typically between 0.8V and 6.0V.
3. How does XC6119N29ANR-G work? XC6119N29ANR-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage drops below the reference voltage, it triggers an output signal.
4. What is the output type of XC6119N29ANR-G? XC6119N29ANR-G has an open-drain output type, which means it can sink current but cannot source current.
5. What is the typical quiescent current of XC6119N29ANR-G? The typical quiescent current of XC6119N29ANR-G is around 1.0µA, making it suitable for low-power applications.
6. Can XC6119N29ANR-G be used in battery-powered devices? Yes, XC6119N29ANR-G is commonly used in battery-powered devices due to its low quiescent current and wide operating voltage range.
7. What is the hysteresis voltage of XC6119N29ANR-G? The hysteresis voltage of XC6119N29ANR-G is typically 0.1V, providing a stable and reliable voltage detection.
8. Can XC6119N29ANR-G be used for overvoltage detection? No, XC6119N29ANR-G is specifically designed for undervoltage detection and does not provide overvoltage detection functionality.
9. What is the typical response time of XC6119N29ANR-G? The typical response time of XC6119N29ANR-G is around 200µs, allowing for quick detection of voltage drops.
10. Is XC6119N29ANR-G suitable for automotive applications? Yes, XC6119N29ANR-G is AEC-Q100 qualified and can be used in automotive applications where undervoltage detection is required.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.