Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6119N15ANR-G

XC6119N15ANR-G

Product Overview

Category

XC6119N15ANR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact package size
  • Low power consumption

Package

XC6119N15ANR-G is available in a small surface-mount package.

Essence

The essence of XC6119N15ANR-G lies in its ability to provide stable voltage output for various electronic applications.

Packaging/Quantity

XC6119N15ANR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119N15ANR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6119N15ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small package size allows for space-saving designs.
  • Low power consumption helps conserve energy.
  • Wide operating temperature range enables usage in various environments.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect efficiency in low input voltage scenarios.

Working Principles

XC6119N15ANR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6119N15ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6119N15ANR-G are: - LM1117-1.5 - LT1763-1.5 - MCP1701-1.5

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 346 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6119N15ANR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6119N15ANR-G in technical solutions:

  1. Q: What is XC6119N15ANR-G? A: XC6119N15ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6119N15ANR-G? A: The operating voltage range of XC6119N15ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119N15ANR-G help in technical solutions? A: XC6119N15ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Q: Can XC6119N15ANR-G be used in battery-powered applications? A: Yes, XC6119N15ANR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6119N15ANR-G? A: XC6119N15ANR-G has an open-drain output, which means it can be easily interfaced with other digital circuits or microcontrollers.

  6. Q: What is the typical accuracy of XC6119N15ANR-G? A: The typical accuracy of XC6119N15ANR-G is ±1.5% of the detection voltage.

  7. Q: Can XC6119N15ANR-G be used in automotive applications? A: Yes, XC6119N15ANR-G is suitable for automotive applications as it can withstand high operating temperatures and has built-in protection features.

  8. Q: Does XC6119N15ANR-G have a built-in hysteresis function? A: Yes, XC6119N15ANR-G has a built-in hysteresis function that helps prevent output oscillation near the detection threshold.

  9. Q: What is the package type of XC6119N15ANR-G? A: XC6119N15ANR-G is available in a small SOT-23-5 package, which is commonly used in compact electronic designs.

  10. Q: Can XC6119N15ANR-G be used in industrial control systems? A: Yes, XC6119N15ANR-G can be used in industrial control systems to monitor power supply voltages and ensure stable operation of critical equipment.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.