Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6119N10ANR-G

XC6119N10ANR-G

Product Overview

Category

XC6119N10ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6119N10ANR-G is available in a small surface-mount package, which makes it suitable for compact electronic devices.

Essence

The essence of XC6119N10ANR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.0V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV @ 50mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119N10ANR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6119N10ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the connected circuitry.
  • Low dropout voltage: The low dropout voltage enables efficient power management even when the input voltage is close to the output voltage.
  • Thermal shutdown protection: In case of excessive temperature, the device automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Low power consumption contributes to longer battery life in portable devices.
  • Overcurrent protection enhances the safety and reliability of the connected circuitry.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • The fixed output voltage may not be adjustable for certain specific requirements.

Working Principles

XC6119N10ANR-G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6119N10ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6119N10ANR-G are: - XC6120N15ANR-G - XC6130N20ANR-G - XC6140N30ANR-G - XC6150N50ANR-G

These models differ in terms of output voltage, maximum output current, and other specifications, providing flexibility to meet different application requirements.

Word count: 411

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6119N10ANR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6119N10ANR-G in technical solutions:

  1. Q: What is XC6119N10ANR-G? A: XC6119N10ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6119N10ANR-G? A: The operating voltage range of XC6119N10ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119N10ANR-G help in technical solutions? A: XC6119N10ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Q: Can XC6119N10ANR-G be used in battery-powered applications? A: Yes, XC6119N10ANR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6119N10ANR-G? A: XC6119N10ANR-G has an open-drain output type, which means it can be easily connected to other devices or microcontrollers.

  6. Q: What is the accuracy of the voltage detection in XC6119N10ANR-G? A: The accuracy of voltage detection in XC6119N10ANR-G is typically ±1.0%.

  7. Q: Can XC6119N10ANR-G be used for overvoltage protection? A: No, XC6119N10ANR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  8. Q: What is the typical response time of XC6119N10ANR-G? A: The typical response time of XC6119N10ANR-G is around 200µs.

  9. Q: Can XC6119N10ANR-G be used in automotive applications? A: Yes, XC6119N10ANR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Q: Is XC6119N10ANR-G available in different package options? A: Yes, XC6119N10ANR-G is available in various package options, including SOT-23-5 and USP-6B.