Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6119N09ANR-G
Lihat Detail Lembar Data

XC6119N09ANR-G

Product Overview

Category

XC6119N09ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6119N09ANR-G is available in a small surface-mount package, which makes it suitable for compact electronic devices.

Essence

The essence of XC6119N09ANR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a specified quantity per package. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.9V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119N09ANR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6119N09ANR-G ensures a stable output voltage of 0.9V regardless of input voltage fluctuations.
  • Power management: This IC efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control of the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size: Suitable for space-constrained electronic devices.
  • High efficiency: Minimizes power loss and maximizes battery life.
  • Low power consumption: Helps conserve energy.
  • Stable output voltage: Ensures reliable operation of connected components.

Disadvantages

  • Limited maximum output current: Not suitable for high-power applications.
  • Restricted input voltage range: Requires an input voltage between 2.5V and 6.0V.

Working Principles

XC6119N09ANR-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage of 0.9V. It achieves this by adjusting the internal resistance based on the input voltage level. The enable pin can be used to control the device's operation, allowing for power management as needed.

Detailed Application Field Plans

XC6119N09ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6119N09ANR-G include: - XC6120N09ANR-G - XC6118N09ANR-G - XC6119N10ANR-G - XC6119N09ANR-H

These models may have slight variations in specifications or package options, but they serve the same purpose of voltage regulation and power management.

Word count: 445 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6119N09ANR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6119N09ANR-G in technical solutions:

  1. Q: What is XC6119N09ANR-G? A: XC6119N09ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6119N09ANR-G? A: The operating voltage range of XC6119N09ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119N09ANR-G help in technical solutions? A: XC6119N09ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Q: What is the output type of XC6119N09ANR-G? A: XC6119N09ANR-G has an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Q: Can XC6119N09ANR-G be used in battery-powered applications? A: Yes, XC6119N09ANR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: What is the typical accuracy of XC6119N09ANR-G? A: The typical accuracy of XC6119N09ANR-G is ±1.5% at room temperature.

  7. Q: Does XC6119N09ANR-G have built-in hysteresis? A: Yes, XC6119N09ANR-G has built-in hysteresis, which helps to prevent oscillation or false triggering when the input voltage is near the threshold.

  8. Q: Can XC6119N09ANR-G be used in automotive applications? A: Yes, XC6119N09ANR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  9. Q: What is the package type of XC6119N09ANR-G? A: XC6119N09ANR-G is available in a small SOT-23-5 package, which is commonly used for surface-mount applications.

  10. Q: Are there any application notes or reference designs available for XC6119N09ANR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in understanding and implementing XC6119N09ANR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet information and application requirements.