Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6119C28A7R-G
Lihat Detail Lembar Data

XC6119C28A7R-G

Product Overview

Category

XC6119C28A7R-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation
  • Power management
  • Small form factor
  • High efficiency

Package

XC6119C28A7R-G is available in a compact 28-pin package.

Essence

The essence of XC6119C28A7R-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Maximum Output Current: 500mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6119C28A7R-G has a total of 28 pins. The pin configuration is as follows:

  1. VOUT
  2. GND
  3. EN
  4. FB
  5. VIN
  6. NC
  7. NC
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC
  15. NC
  16. NC
  17. NC
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. NC

Functional Features

  • Voltage regulation: The XC6119C28A7R-G ensures a stable output voltage within the specified range.
  • Power management: It efficiently manages power consumption, optimizing energy usage.
  • Overcurrent protection: This IC includes built-in overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive heat, the XC6119C28A7R-G automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Built-in protection features enhance device reliability and longevity.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

The XC6119C28A7R-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring and regulating the voltage, it ensures consistent power supply to connected devices.

Detailed Application Field Plans

XC6119C28A7R-G finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6119C28A7R-G are: - XC6120C29A7R-G - XC6130B30A7R-G - XC6140D31A7R-G - XC6150E32A7R-G

These models offer similar functionality and characteristics, providing flexibility in design choices.

Word count: 462 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6119C28A7R-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6119C28A7R-G in technical solutions:

  1. Question: What is XC6119C28A7R-G?
    - Answer: XC6119C28A7R-G is a specific model of voltage detector IC (integrated circuit) used in various technical solutions.

  2. Question: What is the purpose of XC6119C28A7R-G?
    - Answer: The purpose of XC6119C28A7R-G is to monitor the voltage level in a circuit and provide an output signal when the voltage crosses a certain threshold.

  3. Question: What voltage range does XC6119C28A7R-G support?
    - Answer: XC6119C28A7R-G supports a voltage range of 1.8V to 6.0V.

  4. Question: How does XC6119C28A7R-G detect voltage levels?
    - Answer: XC6119C28A7R-G uses an internal voltage reference and comparator to compare the input voltage with a preset threshold.

  5. Question: Can XC6119C28A7R-G be used in battery-powered applications?
    - Answer: Yes, XC6119C28A7R-G can be used in battery-powered applications as it has a low operating current consumption.

  6. Question: What is the output type of XC6119C28A7R-G?
    - Answer: XC6119C28A7R-G provides an open-drain output, which means it can be connected to other devices or circuits for further processing.

  7. Question: Is XC6119C28A7R-G suitable for automotive applications?
    - Answer: Yes, XC6119C28A7R-G is suitable for automotive applications as it can withstand a wide temperature range and has built-in protection features.

  8. Question: Can XC6119C28A7R-G be used in industrial control systems?
    - Answer: Yes, XC6119C28A7R-G can be used in industrial control systems as it provides reliable voltage monitoring and detection.

  9. Question: Does XC6119C28A7R-G have any built-in delay function?
    - Answer: Yes, XC6119C28A7R-G has a built-in delay function that helps prevent false triggering due to voltage fluctuations or noise.

  10. Question: Are there any specific precautions to consider when using XC6119C28A7R-G?
    - Answer: It is recommended to follow the manufacturer's datasheet and guidelines for proper usage, including input voltage limits, operating conditions, and PCB layout considerations.

Please note that the answers provided here are general and may vary depending on the specific application and requirements.