XC6118N22AGR-G

Product Overview

Category

XC6118N22AGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

• Small size and lightweight
• Low power consumption
• High precision voltage regulation
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

XC6118N22AGR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6118N22AGR-G is its ability to regulate voltage with high precision and efficiency.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6118N22AGR-G units.

Specifications

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 2.2V
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 30μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N22AGR-G has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. NC (No Connection)
4. VOUT (Output Voltage)
5. EN (Enable)

Functional Features

• Voltage regulation: XC6118N22AGR-G ensures a stable output voltage of 2.2V regardless of input voltage fluctuations.
• Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
• Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

• Compact size and lightweight make it suitable for space-constrained applications.
• Low power consumption helps in energy-efficient designs.
• High precision voltage regulation ensures stable performance of connected devices.
• Wide input voltage range allows compatibility with various power sources.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• Dropout voltage of 200mV may cause a slight voltage drop across the regulator.

Working Principles

XC6118N22AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 2.2V. The enable pin (EN) can be used to turn the regulator on or off.

Detailed Application Field Plans

XC6118N22AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Wearable devices - IoT modules - Mobile phones - Digital cameras

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N22AGR-G are: - LM1117-2.2 - MCP1700-2.2 - TS2937-2.2 - LP2985-2.2

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6118N22AGR-G is a voltage regulator known for its compact size, low power consumption, and high precision voltage regulation. It is widely used in various electronic devices and offers advantages such as wide input voltage range and overcurrent protection. However, it has limitations in terms of output current capacity and dropout voltage.