Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6118N19AGR-G
Lihat Detail Lembar Data

XC6118N19AGR-G

Product Overview

Category

XC6118N19AGR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Low power consumption
  • Compact size

Package

XC6118N19AGR-G comes in a small surface-mount package.

Essence

The essence of XC6118N19AGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6118N19AGR-G is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.9V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N19AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6118N19AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low power consumption: It consumes minimal power during operation, making it suitable for battery-powered devices.
  • Overcurrent protection: The regulator includes built-in protection against excessive current flow, safeguarding connected components.
  • Thermal shutdown: In case of excessive temperature, the device shuts down automatically to prevent damage.

Advantages and Disadvantages

Advantages

  • Stable voltage output
  • Low power consumption
  • Compact size
  • Overcurrent protection
  • Thermal shutdown feature

Disadvantages

  • Limited output current capacity (150mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6118N19AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6118N19AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N19AGR-G are: - LM1117-1.8V: A low dropout voltage regulator with an output voltage of 1.8V. - LT1763-1.9: A high-performance linear regulator with a fixed output voltage of 1.9V. - MCP1700-1902E: A low quiescent current LDO regulator with a 1.9V output voltage.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6118N19AGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6118N19AGR-G in technical solutions:

  1. Q: What is XC6118N19AGR-G? A: XC6118N19AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N19AGR-G? A: The operating voltage range of XC6118N19AGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N19AGR-G help in technical solutions? A: XC6118N19AGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.

  4. Q: Can XC6118N19AGR-G be used in battery-powered applications? A: Yes, XC6118N19AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6118N19AGR-G? A: XC6118N19AGR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or systems.

  6. Q: What is the typical reset voltage threshold of XC6118N19AGR-G? A: The typical reset voltage threshold of XC6118N19AGR-G is 1.9V.

  7. Q: Can XC6118N19AGR-G be used in automotive applications? A: Yes, XC6118N19AGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Q: Does XC6118N19AGR-G have built-in hysteresis? A: Yes, XC6118N19AGR-G has a built-in hysteresis of typically 0.1V, which helps to prevent oscillation or chattering of the reset signal.

  9. Q: What is the package type of XC6118N19AGR-G? A: XC6118N19AGR-G is available in a SOT-25 package, which is compact and suitable for space-constrained applications.

  10. Q: Can XC6118N19AGR-G be used in industrial control systems? A: Yes, XC6118N19AGR-G can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +105°C) and has a high ESD tolerance.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.