XC6118N12DGR-G

Product Overview

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

Package: DFN (Dual Flat No-Lead)
Essence: Voltage regulator IC
Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6118N12DGR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 1.2V
Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of XC6118N12DGR-G is as follows:

```

| | --| VIN VOUT |-- --| GND EN |-- |___________| ```

VIN: Input voltage pin
VOUT: Output voltage pin
GND: Ground pin
EN: Enable pin

Functional Features

Low dropout voltage
Low quiescent current
Overcurrent protection
Thermal shutdown protection
Short-circuit protection

Advantages and Disadvantages

Advantages

Small package size
Wide input voltage range
Low quiescent current
Built-in protection features

Disadvantages

Limited output current capacity

Working Principles

XC6118N12DGR-G is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load conditions. It operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain the desired output voltage.

Detailed Application Field Plans

XC6118N12DGR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N12DGR-G are: - XC6206P122MR-G - LM1117IMPX-1.2/NOPB - MCP1700T-1202E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 275 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6118N12DGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6118N12DGR-G in technical solutions:

Q: What is XC6118N12DGR-G? A: XC6118N12DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6118N12DGR-G? A: The operating voltage range of XC6118N12DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N12DGR-G help in technical solutions? A: XC6118N12DGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.
Q: Can XC6118N12DGR-G be used in battery-powered applications? A: Yes, XC6118N12DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6118N12DGR-G? A: XC6118N12DGR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or systems.
Q: What is the typical reset threshold voltage of XC6118N12DGR-G? A: The typical reset threshold voltage of XC6118N12DGR-G is 1.2V.
Q: Can XC6118N12DGR-G be used in automotive applications? A: Yes, XC6118N12DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6118N12DGR-G have built-in hysteresis? A: Yes, XC6118N12DGR-G has a built-in hysteresis of typically 0.1V, which helps to prevent oscillation and ensure stable operation.
Q: What is the temperature range of XC6118N12DGR-G? A: The temperature range of XC6118N12DGR-G is typically between -40°C and +85°C.
Q: Is XC6118N12DGR-G available in different package options? A: Yes, XC6118N12DGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet or manufacturer's specifications for XC6118N12DGR-G.