Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6118C48AGR-G
Lihat Detail Lembar Data

XC6118C48AGR-G

Product Overview

Category

XC6118C48AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6118C48AGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.

Package

XC6118C48AGR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6118C48AGR-G lies in its ability to provide reliable and stable voltage regulation in electronic circuits.

Packaging/Quantity

XC6118C48AGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 4.8V
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30μA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6118C48AGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6118C48AGR-G maintains a constant output voltage regardless of changes in the input voltage or load conditions.
  • Low dropout voltage: It can operate with a minimal voltage difference between the input and output, ensuring efficient power conversion.
  • Low quiescent current: In standby mode, the regulator consumes very little current, minimizing power consumption.
  • Thermal shutdown protection: It automatically shuts down if the temperature exceeds a safe threshold, protecting the device from damage.

Advantages and Disadvantages

Advantages

  • Stable output voltage regulation
  • Efficient operation with low dropout voltage
  • Minimal power consumption in standby mode
  • Built-in thermal shutdown protection

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Requires external enable pin for control (optional)

Working Principles

XC6118C48AGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage. The enable pin can be used to control the regulator's operation.

Detailed Application Field Plans

XC6118C48AGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial automation equipment - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6118C48AGR-G include: - LM1117-4.8: A popular linear voltage regulator with a fixed 4.8V output. - LT1761-4.8: A low dropout linear regulator with a fixed 4.8V output. - TPS7A4901: An adjustable voltage regulator with a wide input voltage range and low dropout voltage.

These alternative models can be considered based on specific requirements and design constraints.

(Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6118C48AGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6118C48AGR-G in technical solutions:

  1. Q: What is XC6118C48AGR-G? A: XC6118C48AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C48AGR-G? A: The operating voltage range of XC6118C48AGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C48AGR-G help in technical solutions? A: XC6118C48AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.

  4. Q: What is the typical reset voltage threshold of XC6118C48AGR-G? A: The typical reset voltage threshold of XC6118C48AGR-G is 4.8V.

  5. Q: Can XC6118C48AGR-G be used in battery-powered applications? A: Yes, XC6118C48AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  6. Q: Does XC6118C48AGR-G have any built-in delay time for the reset signal? A: Yes, XC6118C48AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6118C48AGR-G available in different package options? A: Yes, XC6118C48AGR-G is available in a SOT-25 package, which is a small surface-mount package.

  8. Q: Can XC6118C48AGR-G withstand high temperatures? A: Yes, XC6118C48AGR-G has an operating temperature range of -40°C to +85°C, making it suitable for various environments.

  9. Q: Does XC6118C48AGR-G have any additional features? A: Yes, XC6118C48AGR-G has a built-in hysteresis function that prevents the reset signal from oscillating when the power supply voltage is near the threshold level.

  10. Q: Where can I find more information about XC6118C48AGR-G? A: You can find more detailed information about XC6118C48AGR-G in the datasheet provided by the manufacturer or by contacting the manufacturer directly.