XC6118C32CGR-G

Product Overview

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

Package: CGR (SOT-89)
Essence: Voltage regulator IC
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6118C32CGR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 3.2V
Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 40μA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C32CGR-G has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin

Functional Features

The functional features of XC6118C32CGR-G include:

Low dropout voltage
Low quiescent current
Overcurrent protection
Thermal shutdown protection
Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.

Disadvantages: - Limited output current capacity (150mA).

Working Principles

XC6118C32CGR-G works by regulating the input voltage to a stable output voltage of 3.2V. It achieves this through internal circuitry that adjusts the voltage based on the feedback received from the output pin. The device continuously monitors the output voltage and makes necessary adjustments to maintain a stable and accurate output.

Detailed Application Field Plans

XC6118C32CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C32CGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 275 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6118C32CGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6118C32CGR-G in technical solutions:

Q: What is XC6118C32CGR-G? A: XC6118C32CGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6118C32CGR-G? A: The operating voltage range of XC6118C32CGR-G is typically between 0.7V and 6.0V.
Q: How does XC6118C32CGR-G work? A: XC6118C32CGR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.
Q: What is the output type of XC6118C32CGR-G? A: XC6118C32CGR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate a low voltage condition.
Q: What is the typical quiescent current of XC6118C32CGR-G? A: The typical quiescent current of XC6118C32CGR-G is very low, usually around 1.0µA.
Q: Can XC6118C32CGR-G be used for overvoltage detection? A: No, XC6118C32CGR-G is specifically designed for undervoltage detection. It cannot be used for overvoltage detection.
Q: What is the typical accuracy of XC6118C32CGR-G? A: The typical accuracy of XC6118C32CGR-G is ±2.0%.
Q: Can XC6118C32CGR-G be used in automotive applications? A: Yes, XC6118C32CGR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 3 qualification.
Q: What is the temperature range of XC6118C32CGR-G? A: XC6118C32CGR-G has an operating temperature range of -40°C to +85°C.
Q: How can XC6118C32CGR-G be connected in a circuit? A: XC6118C32CGR-G requires a few external components such as resistors and capacitors to set the detection voltage and delay time. The datasheet provides detailed application circuit examples.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate information.