Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6108N41AGR-G

XC6108N41AGR-G

Product Overview

Category

XC6108N41AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection
  • Overcurrent protection

Package

XC6108N41AGR-G is available in a small surface-mount package, typically SOT-23-5.

Essence

The essence of XC6108N41AGR-G lies in its ability to provide stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6108N41AGR-G is usually packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.1V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N41AGR-G has five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Feedback (FB) Pin 4: Not Connected (NC) Pin 5: Output (OUT)

Functional Features

  • Voltage regulation: XC6108N41AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of a short circuit or overload.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage regulation
  • Low quiescent current consumption
  • Compact size and easy integration into electronic circuits
  • Thermal and overcurrent protection enhance reliability

Disadvantages

  • Limited maximum output current (150mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6108N41AGR-G operates based on the principle of feedback control. The feedback pin (FB) monitors the output voltage and compares it with a reference voltage. If the output voltage deviates from the desired value, the internal circuitry adjusts the pass transistor to maintain the correct output voltage.

Detailed Application Field Plans

XC6108N41AGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N41AGR-G are: - LM1117-4.1 - MCP1703-4102E/TO - LP2985-4.1

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Word count: 369 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6108N41AGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6108N41AGR-G in technical solutions:

  1. Q: What is XC6108N41AGR-G? A: XC6108N41AGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N41AGR-G? A: The operating voltage range of XC6108N41AGR-G is typically between 0.7V and 6.0V.

  3. Q: How does XC6108N41AGR-G work? A: XC6108N41AGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the typical reset threshold voltage of XC6108N41AGR-G? A: The typical reset threshold voltage of XC6108N41AGR-G is 4.1V.

  5. Q: Can XC6108N41AGR-G be used in battery-powered applications? A: Yes, XC6108N41AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Is XC6108N41AGR-G suitable for automotive applications? A: Yes, XC6108N41AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  7. Q: Does XC6108N41AGR-G have built-in delay time for the reset signal? A: Yes, XC6108N41AGR-G has a built-in delay time of typically 200ms to prevent false resets during power fluctuations.

  8. Q: Can XC6108N41AGR-G be used in high-temperature environments? A: Yes, XC6108N41AGR-G has an operating temperature range of -40°C to +125°C, making it suitable for high-temperature environments.

  9. Q: What is the package type of XC6108N41AGR-G? A: XC6108N41AGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Q: Are there any application notes or reference designs available for XC6108N41AGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in the implementation of XC6108N41AGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6108N41AGR-G.