Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6108N35DGR-G

XC6108N35DGR-G

Product Overview

Category

XC6108N35DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108N35DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N35DGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108N35DGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N35DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N35DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various circuit designs.
  • Low power consumption helps conserve energy.
  • Stable voltage output ensures reliable performance of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may cause a slight voltage drop across the regulator.

Working Principles

XC6108N35DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring the input and output voltages, it compensates for any variations and ensures a consistent voltage level.

Detailed Application Field Plans

XC6108N35DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N35DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 411 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6108N35DGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6108N35DGR-G in technical solutions:

  1. Q: What is XC6108N35DGR-G? A: XC6108N35DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108N35DGR-G? A: The operating voltage range of XC6108N35DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N35DGR-G help in technical solutions? A: XC6108N35DGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.

  4. Q: Can XC6108N35DGR-G be used in battery-powered applications? A: Yes, XC6108N35DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the typical reset threshold voltage of XC6108N35DGR-G? A: The typical reset threshold voltage of XC6108N35DGR-G is 3.5V.

  6. Q: Does XC6108N35DGR-G have an adjustable reset threshold voltage? A: No, XC6108N35DGR-G does not have an adjustable reset threshold voltage. It is fixed at 3.5V.

  7. Q: Can XC6108N35DGR-G generate an active-low reset signal? A: Yes, XC6108N35DGR-G generates an active-low reset signal, which goes low when the voltage drops below the threshold.

  8. Q: What is the typical response time of XC6108N35DGR-G? A: The typical response time of XC6108N35DGR-G is 200ms.

  9. Q: Is XC6108N35DGR-G suitable for automotive applications? A: Yes, XC6108N35DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Q: Can XC6108N35DGR-G be used in industrial control systems? A: Yes, XC6108N35DGR-G can be used in industrial control systems to ensure stable operation and protect against voltage fluctuations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.