Lihat spesifikasi untuk detail produk.
XC6108N33DGR-G
Product Overview
Category
XC6108N33DGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- Wide input voltage range
Package
XC6108N33DGR-G is available in a small surface-mount package.
Essence
The essence of XC6108N33DGR-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108N33DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: XC6108N33DGR-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
- Overcurrent protection: The device incorporates overcurrent protection to safeguard connected components.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- Low power consumption helps conserve energy.
- Wide input voltage range enables compatibility with various power sources.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect efficiency in low input voltage scenarios.
Working Principles
XC6108N33DGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. This ensures a stable output even when the input voltage varies.
Detailed Application Field Plans
XC6108N33DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108N33DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TS2937CP-3.3
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 314 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6108N33DGR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6108N33DGR-G in technical solutions:
Q: What is XC6108N33DGR-G? A: XC6108N33DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108N33DGR-G? A: The operating voltage range of XC6108N33DGR-G is typically from 0.9V to 6.0V.
Q: How does XC6108N33DGR-G help in technical solutions? A: XC6108N33DGR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to initiate a safe startup or recovery process.
Q: Can XC6108N33DGR-G be used in battery-powered applications? A: Yes, XC6108N33DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6108N33DGR-G? A: XC6108N33DGR-G has an open-drain output type, which allows for flexibility in connecting external components.
Q: What is the typical reset threshold voltage of XC6108N33DGR-G? A: The typical reset threshold voltage of XC6108N33DGR-G is 3.3V, but it can be customized based on specific requirements.
Q: Is XC6108N33DGR-G suitable for automotive applications? A: Yes, XC6108N33DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6108N33DGR-G be used in industrial control systems? A: Absolutely, XC6108N33DGR-G is well-suited for industrial control systems due to its wide operating voltage range and robust performance.
Q: Does XC6108N33DGR-G have built-in protection features? A: Yes, XC6108N33DGR-G includes built-in overcurrent protection and thermal shutdown features to ensure safe operation.
Q: What package options are available for XC6108N33DGR-G? A: XC6108N33DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary based on specific datasheet or application requirements.