XC6108N19BGR-G

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Thermal shutdown protection - Overcurrent protection

Package: SOT-23-5

Essence: The XC6108N19BGR-G is a voltage regulator IC designed to provide a stable output voltage for various electronic devices.

Packaging/Quantity: The XC6108N19BGR-G is typically sold in reels containing 3000 units.

Specifications

Input Voltage Range: 2.5V - 6.0V
Output Voltage: 1.9V
Dropout Voltage: 200mV @ 100mA
Quiescent Current: 30µA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6108N19BGR-G has the following pin configuration:

VIN (Input Voltage)
GND (Ground)
NC (No Connection)
VOUT (Output Voltage)
EN (Enable)

Functional Features

Low Dropout Voltage: The XC6108N19BGR-G exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
High Output Voltage Accuracy: This voltage regulator provides a highly accurate output voltage of 1.9V, making it suitable for applications requiring precise voltage regulation.
Low Quiescent Current: With a quiescent current of only 30µA, the XC6108N19BGR-G minimizes power consumption and extends battery life in portable devices.
Thermal Shutdown Protection: The IC incorporates thermal shutdown protection, which prevents damage due to excessive heat by shutting down the regulator when the temperature exceeds a safe threshold.
Overcurrent Protection: The XC6108N19BGR-G includes overcurrent protection, safeguarding the circuit from damage caused by excessive current flow.

Advantages and Disadvantages

Advantages: - High output voltage accuracy - Low dropout voltage - Low quiescent current - Thermal shutdown protection - Overcurrent protection

Disadvantages: - Limited input voltage range (2.5V - 6.0V) - Noisy output at high currents

Working Principles

The XC6108N19BGR-G is a linear voltage regulator that operates by comparing the output voltage with a reference voltage. It adjusts the resistance between the input and output to maintain a stable output voltage, compensating for changes in load and input voltage.

Detailed Application Field Plans

The XC6108N19BGR-G is commonly used in various electronic devices that require a stable 1.9V power supply. Some typical applications include:

Mobile phones
Portable media players
Digital cameras
Wireless communication devices
Battery-powered IoT devices

Detailed and Complete Alternative Models

XC6208P192MR-G: Similar voltage regulator IC with a slightly higher output voltage of 1.92V.
XC6220N19AMR-G: Voltage regulator IC with a lower dropout voltage of 100mV @ 100mA.
XC6219B19AMR-G: Voltage regulator IC with an adjustable output voltage range of 1.2V - 3.6V.

These alternative models offer similar functionality and can be considered as substitutes for the XC6108N19BGR-G depending on specific requirements.

Word count: 366 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6108N19BGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6108N19BGR-G in technical solutions:

1. What is XC6108N19BGR-G? - XC6108N19BGR-G is a voltage detector IC (Integrated Circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

2. What is the operating voltage range of XC6108N19BGR-G? - The operating voltage range of XC6108N19BGR-G is from 0.7V to 6.0V.

3. What is the output type of XC6108N19BGR-G? - XC6108N19BGR-G has an open-drain output type.

4. What is the typical quiescent current of XC6108N19BGR-G? - The typical quiescent current of XC6108N19BGR-G is 1.0µA.

5. What is the hysteresis voltage of XC6108N19BGR-G? - The hysteresis voltage of XC6108N19BGR-G is typically 0.1V.

6. What is the purpose of using XC6108N19BGR-G in a technical solution? - XC6108N19BGR-G is commonly used as a voltage monitoring and detection component in various applications, such as battery-powered devices, power management systems, and low-power microcontroller circuits.

7. How does XC6108N19BGR-G help in protecting electronic circuits? - XC6108N19BGR-G helps protect electronic circuits by providing accurate voltage monitoring and triggering actions based on the detected voltage levels. It can be used to initiate shutdown sequences or trigger alarms when the voltage goes above or below a certain threshold.

8. Can XC6108N19BGR-G be used in automotive applications? - Yes, XC6108N19BGR-G is suitable for automotive applications as it can operate within the specified temperature range (-40°C to +105°C) and has low power consumption.

9. Is XC6108N19BGR-G compatible with different microcontrollers? - Yes, XC6108N19BGR-G is compatible with various microcontrollers as it has an open-drain output that can be easily interfaced with different digital input pins.

10. Are there any specific precautions to consider while using XC6108N19BGR-G? - It is important to ensure proper decoupling capacitors are used near the VDD and GND pins of XC6108N19BGR-G to minimize noise and stabilize the voltage detection. Additionally, the maximum voltage rating of 6.0V should not be exceeded to prevent damage to the IC.