Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6108C49DGR-G
Lihat Detail Lembar Data

XC6108C49DGR-G

Product Overview

Category

XC6108C49DGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • High precision voltage regulation
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6108C49DGR-G is available in a compact SOT-89 package.

Essence

The essence of XC6108C49DGR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of XC6108C49DGR-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: Up to 100mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 200mV (typical)

Detailed Pin Configuration

XC6108C49DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C49DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High precision voltage regulation ensures reliable performance.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current capacity may not be suitable for high-power devices.
  • Dropout voltage can cause a slight voltage drop across the regulator.

Working Principles

XC6108C49DGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6108C49DGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108C49DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models can be considered as alternatives based on specific requirements and design considerations.

Word count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6108C49DGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6108C49DGR-G in technical solutions:

  1. Q: What is XC6108C49DGR-G? A: XC6108C49DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C49DGR-G? A: The operating voltage range of XC6108C49DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C49DGR-G help in technical solutions? A: XC6108C49DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: Can XC6108C49DGR-G be used in battery-powered applications? A: Yes, XC6108C49DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  5. Q: What is the typical reset voltage threshold of XC6108C49DGR-G? A: The typical reset voltage threshold of XC6108C49DGR-G is 4.9V.

  6. Q: Does XC6108C49DGR-G have an adjustable reset voltage threshold? A: No, XC6108C49DGR-G does not have an adjustable reset voltage threshold. It has a fixed threshold value.

  7. Q: What is the output type of XC6108C49DGR-G? A: XC6108C49DGR-G has an active-low output type, which means the reset signal is active when the voltage drops below the threshold.

  8. Q: Can XC6108C49DGR-G be used in automotive applications? A: Yes, XC6108C49DGR-G can be used in automotive applications as it meets the requirements for automotive-grade components.

  9. Q: What is the typical response time of XC6108C49DGR-G? A: The typical response time of XC6108C49DGR-G is around 1ms, ensuring a quick reset signal when the voltage drops below the threshold.

  10. Q: Is XC6108C49DGR-G available in different package options? A: Yes, XC6108C49DGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C49DGR-G.