Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6108C21CGR-G

XC6108C21CGR-G

Product Overview

Category

XC6108C21CGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stable output
  • Low power consumption
  • Compact size

Package

XC6108C21CGR-G comes in a small surface-mount package.

Essence

The essence of XC6108C21CGR-G is to provide a reliable and stable voltage supply for electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.1V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C21CGR-G has three pins:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin

Functional Features

  • Voltage regulation: XC6108C21CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds its maximum rating.
  • Thermal shutdown: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption makes it suitable for battery-powered applications.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect efficiency in low input voltage scenarios.

Working Principles

XC6108C21CGR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6108C21CGR-G is commonly used in various electronic devices, including:

  1. Mobile phones
  2. Portable media players
  3. Wearable devices
  4. IoT devices
  5. Battery-powered applications

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C21CGR-G are:

  1. LM1117-2.1: A popular voltage regulator with similar specifications.
  2. MCP1702-210: Another voltage regulator offering stable 2.1V output.
  3. TS2937CX-2.1: Low dropout voltage regulator suitable for low input voltage applications.

These alternative models provide similar functionality and can be used as replacements based on specific requirements.

Word count: 345 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6108C21CGR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6108C21CGR-G in technical solutions:

  1. Q: What is XC6108C21CGR-G? A: XC6108C21CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What are the typical applications of XC6108C21CGR-G? A: XC6108C21CGR-G is commonly used in various electronic devices and systems where it is important to detect power supply voltage levels and initiate a reset or shutdown sequence if necessary.

  3. Q: How does XC6108C21CGR-G work? A: XC6108C21CGR-G continuously monitors the input voltage and compares it with a reference voltage. If the input voltage falls below the reference voltage, it triggers the reset output, which can be used to reset the microcontroller or other components.

  4. Q: What is the operating voltage range of XC6108C21CGR-G? A: The operating voltage range of XC6108C21CGR-G is typically between 0.9V and 6.0V.

  5. Q: Can XC6108C21CGR-G be used in battery-powered applications? A: Yes, XC6108C21CGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Q: Does XC6108C21CGR-G have any built-in protection features? A: Yes, XC6108C21CGR-G includes built-in overcurrent protection and thermal shutdown features to protect against excessive current or temperature conditions.

  7. Q: What is the output type of XC6108C21CGR-G? A: XC6108C21CGR-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  8. Q: Can XC6108C21CGR-G operate in different temperature ranges? A: Yes, XC6108C21CGR-G is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  9. Q: Is XC6108C21CGR-G available in different package options? A: Yes, XC6108C21CGR-G is available in various package options, such as SOT-23 and USP-4B, providing flexibility for different PCB layouts.

  10. Q: Where can I find more detailed information about XC6108C21CGR-G? A: You can refer to the datasheet or technical documentation provided by the manufacturer for more detailed information about XC6108C21CGR-G, including electrical characteristics, pin configurations, and application examples.