Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TPS2111PWR
Lihat Detail Lembar Data

TPS2111PWR

Product Overview

Category

The TPS2111PWR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for power multiplexing and protection in various electronic devices.

Characteristics

  • Power multiplexer with built-in protection features
  • Low on-resistance
  • Wide input voltage range
  • High current handling capability
  • Efficient power management

Package

The TPS2111PWR is available in a small outline package (SOP) with a thermal pad for enhanced heat dissipation.

Essence

The essence of the TPS2111PWR lies in its ability to efficiently manage power distribution and provide protection against overcurrent and reverse voltage conditions.

Packaging/Quantity

The TPS2111PWR is typically packaged in reels, containing a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • On-Resistance: 50mΩ (typical)
  • Current Limit: 2A (maximum)
  • Reverse Voltage Protection: -20V (maximum)

Detailed Pin Configuration

The TPS2111PWR has the following pin configuration:

  1. EN (Enable)
  2. IN1 (Input 1)
  3. IN2 (Input 2)
  4. OUT (Output)
  5. GND (Ground)
  6. VBAT (Battery Voltage)

Functional Features

  • Power multiplexing between two input sources (IN1 and IN2)
  • Automatic selection of the higher voltage input source
  • Overcurrent protection with current limit threshold
  • Reverse voltage protection to prevent damage to the device
  • Enable pin for controlling the power multiplexer operation

Advantages and Disadvantages

Advantages

  • Efficient power management and distribution
  • Protection against overcurrent and reverse voltage conditions
  • Wide input voltage range allows compatibility with various power sources
  • Low on-resistance minimizes power losses

Disadvantages

  • Limited maximum current handling capability (2A)
  • Temperature limitations may restrict usage in extreme environments

Working Principles

The TPS2111PWR operates by continuously monitoring the voltage levels of the two input sources (IN1 and IN2). It automatically selects the higher voltage source and connects it to the output pin (OUT) while disconnecting the lower voltage source. This ensures that the device being powered receives the highest available voltage.

Additionally, the TPS2111PWR incorporates protection mechanisms such as overcurrent detection and reverse voltage protection. If an overcurrent condition is detected, the device limits the current flow to prevent damage. In case of a reverse voltage, the device blocks the flow of current to protect itself and the connected components.

Detailed Application Field Plans

The TPS2111PWR finds applications in various electronic devices where power multiplexing and protection are required. Some potential application fields include:

  1. Battery-powered portable devices: Enables seamless switching between battery and external power sources, ensuring uninterrupted operation.
  2. Industrial automation systems: Facilitates power distribution and protection in control panels and motor drives.
  3. Automotive electronics: Provides power multiplexing and protection for automotive control units and infotainment systems.
  4. IoT devices: Allows efficient power management and protection in smart home devices and wearable technology.

Detailed and Complete Alternative Models

  1. TPS2110PWR: Similar to TPS2111PWR but with a lower current handling capability (1A).
  2. TPS2112PWR: Similar to TPS2111PWR but with a higher current handling capability (3A).
  3. TPS2113PWR: Power multiplexer with additional features such as adjustable current limit and fault reporting.

These alternative models offer different current ratings and additional functionalities to cater to specific application requirements.

Word count: 535 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TPS2111PWR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TPS2111PWR in technical solutions:

Q1: What is TPS2111PWR? A1: TPS2111PWR is a power multiplexer IC (Integrated Circuit) that allows for seamless switching between two power sources.

Q2: What are the typical applications of TPS2111PWR? A2: TPS2111PWR is commonly used in battery-powered systems, USB-powered devices, and other portable electronic devices.

Q3: What is the input voltage range supported by TPS2111PWR? A3: TPS2111PWR supports an input voltage range of 2.7V to 5.5V.

Q4: Can TPS2111PWR handle high currents? A4: Yes, TPS2111PWR can handle currents up to 2A.

Q5: How does TPS2111PWR achieve seamless power source switching? A5: TPS2111PWR uses an internal FET (Field-Effect Transistor) to switch between the two power sources without interruption.

Q6: Does TPS2111PWR have any built-in protection features? A6: Yes, TPS2111PWR includes overcurrent protection and thermal shutdown features to ensure safe operation.

Q7: Can TPS2111PWR be controlled through an external microcontroller? A7: Yes, TPS2111PWR can be controlled using a digital signal from an external microcontroller.

Q8: Is TPS2111PWR compatible with both analog and digital signals? A8: Yes, TPS2111PWR can handle both analog and digital signals.

Q9: Can TPS2111PWR be used in automotive applications? A9: Yes, TPS2111PWR is suitable for automotive applications as it can handle the required voltage and current levels.

Q10: What package options are available for TPS2111PWR? A10: TPS2111PWR is available in a small outline package (SOP) with 8 pins.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of TPS2111PWR.