Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TMUX136RSER
Lihat Detail Lembar Data

TMUX136RSER

Product Overview

  • Category: Electronic Component
  • Use: Signal Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power, compact design
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Efficiently routes multiple signals to a single output or vice versa
  • Packaging/Quantity: Available in reels of 250 units

Specifications

  • Number of Channels: 16
  • Supply Voltage Range: 2.7V to 5.5V
  • On-Resistance: 4Ω (typical)
  • Bandwidth: 400MHz (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOIC-16

Detailed Pin Configuration

  1. A0: Address Input Bit 0
  2. A1: Address Input Bit 1
  3. A2: Address Input Bit 2
  4. EN: Enable Input
  5. S0: Channel Select Bit 0
  6. S1: Channel Select Bit 1
  7. S2: Channel Select Bit 2
  8. GND: Ground
  9. COM: Common Terminal
  10. D0: Data Input/Output for Channel 0
  11. D1: Data Input/Output for Channel 1
  12. D2: Data Input/Output for Channel 2
  13. D3: Data Input/Output for Channel 3
  14. D4: Data Input/Output for Channel 4
  15. D5: Data Input/Output for Channel 5
  16. VCC: Supply Voltage

Functional Features

  • Allows selection of one input from multiple channels
  • Enables routing of selected signal to the output channel
  • Low on-resistance ensures minimal signal distortion
  • Wide bandwidth supports high-speed data transmission
  • Low power consumption for energy-efficient operation
  • Compact design saves board space

Advantages and Disadvantages

Advantages

  • High-speed signal routing
  • Low power consumption
  • Compact size
  • Wide operating temperature range
  • Easy integration into existing circuits

Disadvantages

  • Limited number of channels (16)
  • Requires external control signals for channel selection

Working Principles

TMUX136RSER is a signal multiplexer/demultiplexer that operates based on the address and channel select inputs. The address inputs (A0, A1, A2) determine the desired channel, while the channel select inputs (S0, S1, S2) enable the corresponding channel. When a specific channel is selected, the input signal connected to that channel is routed to the output terminal.

Detailed Application Field Plans

  • Data communication systems
  • Audio/video equipment
  • Test and measurement instruments
  • Industrial automation
  • Medical devices
  • Automotive electronics

Detailed and Complete Alternative Models

  1. TMUX1208: 8-channel analog multiplexer/demultiplexer
  2. TMUX1109: 9-channel digital multiplexer/demultiplexer
  3. TMUX1604: 4-channel precision analog multiplexer/demultiplexer
  4. TMUX0805: 5-channel low-voltage analog multiplexer/demultiplexer
  5. TMUX0402: 2-channel bidirectional analog switch

(Note: These alternative models are provided as examples and may not cover all available options.)

This entry provides an overview of TMUX136RSER, a signal multiplexer/demultiplexer component. It includes basic information such as its category, use, characteristics, package type, essence, packaging/quantity details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TMUX136RSER dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TMUX136RSER in technical solutions:

  1. Q: What is TMUX136RSER? A: TMUX136RSER is a multiplexer/demultiplexer IC (Integrated Circuit) used for signal routing and switching in technical solutions.

  2. Q: What are the key features of TMUX136RSER? A: TMUX136RSER offers 16 channels, low on-resistance, wide voltage range, and compatibility with various digital and analog signals.

  3. Q: How can TMUX136RSER be used in technical solutions? A: TMUX136RSER can be used to route or switch signals between different components or subsystems in electronic systems, such as audio/video equipment, communication devices, or industrial automation systems.

  4. Q: What is the voltage range supported by TMUX136RSER? A: TMUX136RSER supports a wide voltage range from -5V to +5V, making it suitable for both digital and analog applications.

  5. Q: Can TMUX136RSER handle high-frequency signals? A: Yes, TMUX136RSER has a high bandwidth and can handle signals up to several hundred megahertz (MHz), making it suitable for high-frequency applications.

  6. Q: Is TMUX136RSER compatible with different logic levels? A: Yes, TMUX136RSER is compatible with various logic levels, including TTL, CMOS, and LVCMOS, ensuring compatibility with different digital systems.

  7. Q: Does TMUX136RSER require external power supply? A: Yes, TMUX136RSER requires an external power supply typically ranging from +2.7V to +5.5V, depending on the specific application requirements.

  8. Q: Can TMUX136RSER be controlled remotely? A: Yes, TMUX136RSER can be controlled remotely using digital control signals, allowing for easy integration into larger systems or automated setups.

  9. Q: What is the typical response time of TMUX136RSER? A: TMUX136RSER has a fast response time in the nanosecond range, ensuring quick and efficient signal switching.

  10. Q: Are there any recommended applications for TMUX136RSER? A: TMUX136RSER is commonly used in audio/video routers, test and measurement equipment, data acquisition systems, and other applications requiring signal routing or switching capabilities.

Please note that these questions and answers are general and may vary depending on the specific use case and technical requirements.