Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TMP175AIDGKTG4
Lihat Detail Lembar Data

TMP175AIDGKTG4

Product Overview

Category: Temperature Sensor
Use: Monitoring and controlling temperature in various applications
Characteristics: High accuracy, low power consumption, small package size
Package: 6-pin SOT-23 package
Essence: Precise temperature sensing for efficient thermal management
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Temperature range: -40°C to +125°C
  • Accuracy: ±1°C (maximum) from -10°C to +85°C
  • Supply voltage: 2.7V to 5.5V
  • Resolution: 9 to 12 bits
  • I2C interface

Detailed Pin Configuration

  1. GND
  2. ALERT/RDY
  3. SDA
  4. SCL
  5. A0
  6. VCC

Functional Features

  • High accuracy over a wide temperature range
  • Low power consumption for battery-powered applications
  • Small form factor for space-constrained designs
  • Digital output for easy interfacing with microcontrollers

Advantages and Disadvantages

Advantages: - Wide temperature range - High accuracy - Low power consumption

Disadvantages: - Limited resolution compared to some alternative models

Working Principles

The TMP175AIDGKTG4 operates by converting temperature measurements into digital data using an internal ADC. It communicates the temperature readings to a microcontroller through the I2C interface, allowing for precise temperature monitoring and control.

Detailed Application Field Plans

  1. Consumer Electronics: Used in smartphones, tablets, and laptops for thermal management.
  2. Industrial Automation: Employed in industrial equipment to monitor and regulate temperature.
  3. Automotive: Integrated into automotive systems for climate control and battery management.

Detailed and Complete Alternative Models

  1. TMP117: Offers higher accuracy and lower power consumption.
  2. LM75: Provides similar functionality with a different package and interface.

This entry provides comprehensive information about the TMP175AIDGKTG4 temperature sensor, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TMP175AIDGKTG4 dalam solusi teknis

  1. What is the operating voltage range of TMP175AIDGKTG4?

    • The operating voltage range of TMP175AIDGKTG4 is 2.7V to 5.5V.

  2. What is the temperature accuracy of TMP175AIDGKTG4?

    • TMP175AIDGKTG4 has a temperature accuracy of ±1°C (maximum) from -25°C to +85°C.

  3. Can TMP175AIDGKTG4 be used in battery-powered applications?

    • Yes, TMP175AIDGKTG4's low operating voltage range makes it suitable for battery-powered applications.

  4. What is the I2C address of TMP175AIDGKTG4?

    • The I2C address of TMP175AIDGKTG4 is configurable and can be set to one of four different addresses.

  5. Does TMP175AIDGKTG4 have hysteresis to prevent rapid temperature fluctuations?

    • Yes, TMP175AIDGKTG4 features programmable temperature limits with hysteresis to minimize rapid temperature changes.

  6. Is TMP175AIDGKTG4 suitable for industrial temperature monitoring applications?

    • Yes, TMP175AIDGKTG4 is suitable for industrial temperature monitoring due to its wide temperature range and high accuracy.

  7. What is the power consumption of TMP175AIDGKTG4?

    • TMP175AIDGKTG4 has a low power consumption of 4µA (typical) and 0.1µA (standby).

  8. Can TMP175AIDGKTG4 be used in automotive applications?

    • Yes, TMP175AIDGKTG4 is AEC-Q100 qualified, making it suitable for automotive applications.

  9. Does TMP175AIDGKTG4 support temperature alert functionality?

    • Yes, TMP175AIDGKTG4 supports programmable temperature alert functionality to trigger an interrupt when temperature thresholds are exceeded.

  10. What is the package type of TMP175AIDGKTG4?

    • TMP175AIDGKTG4 is available in a small 6-pin SOT-23 package, making it suitable for space-constrained applications.