Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TLC5628IDWRG4
Lihat Detail Lembar Data

TLC5628IDWRG4

Product Overview

Category

TLC5628IDWRG4 belongs to the category of digital-to-analog converters (DACs).

Use

This product is used to convert digital signals into analog voltages. It finds applications in various electronic systems where precise analog voltage outputs are required.

Characteristics

  • High resolution: TLC5628IDWRG4 offers a resolution of 8 bits, allowing for fine-grained control over the analog output.
  • Low power consumption: The device operates at low power levels, making it suitable for battery-powered applications.
  • Fast settling time: With a fast settling time, this DAC can quickly respond to changes in the digital input and provide accurate analog outputs.
  • Wide operating voltage range: The TLC5628IDWRG4 can operate within a wide voltage range, making it compatible with different power supply configurations.

Package

The TLC5628IDWRG4 comes in a small-sized package, known as SOIC-16 (Small Outline Integrated Circuit). This package offers ease of handling and compatibility with standard PCB manufacturing processes.

Essence

The essence of TLC5628IDWRG4 lies in its ability to convert digital data into precise analog voltages, enabling accurate control and manipulation of analog signals in electronic systems.

Packaging/Quantity

The TLC5628IDWRG4 is typically sold in reels containing 2500 units per reel.

Specifications

  • Resolution: 8 bits
  • Number of channels: 1
  • Supply voltage range: 2.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Output voltage range: 0V to Vref (supply voltage)
  • Digital interface: Serial (SPI)

Detailed Pin Configuration

The TLC5628IDWRG4 has a total of 16 pins. The pin configuration is as follows:

  1. VDD: Positive power supply
  2. VSS: Ground
  3. DIN: Serial data input
  4. SCLK: Serial clock input
  5. CS: Chip select input
  6. LDAC: Load DAC input
  7. REF: Reference voltage input
  8. AGND: Analog ground
  9. OUT: Analog output
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • High accuracy: The TLC5628IDWRG4 provides precise analog outputs with minimal errors.
  • Low glitch energy: This DAC minimizes glitches during transitions, ensuring stable and accurate analog signals.
  • Power-on reset: The device includes a power-on reset circuit that initializes the DAC to a known state upon power-up.
  • Internal reference: It incorporates an internal voltage reference, eliminating the need for an external reference source.

Advantages and Disadvantages

Advantages

  • High resolution allows for fine control over analog outputs.
  • Low power consumption makes it suitable for battery-powered applications.
  • Fast settling time enables quick response to digital input changes.
  • Wide operating voltage range ensures compatibility with various power supply configurations.

Disadvantages

  • Limited number of channels (only 1 channel).
  • Requires an external microcontroller or digital interface to provide digital input.

Working Principles

The TLC5628IDWRG4 operates based on the principle of pulse-width modulation (PWM). It receives digital input data through the serial interface and converts it into corresponding analog voltages. The internal digital-to-analog conversion process involves using a reference voltage and a resistor ladder network to generate the desired analog output.

Detailed Application Field Plans

The TLC5628IDWRG4 finds applications in various fields, including: 1. Industrial automation: Used for controlling analog actuators and sensors in industrial systems. 2. Audio equipment: Enables precise control over audio signals in amplifiers, mixers, and digital audio processors. 3. Test and measurement instruments: Provides accurate analog voltage outputs for calibration and signal generation purposes. 4. Automotive electronics: Used in automotive systems for controlling analog functions such as motor speed control and sensor interfacing.

Detailed and Complete Alternative Models

  • MCP4921: 12-bit DAC with SPI interface.
  • MAX5216: 16-bit DAC with I2C interface.
  • AD5628: 12-bit DAC with serial interface.

These alternative models offer different resolutions, interfaces, and features to suit specific application requirements.

Word count: 581 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TLC5628IDWRG4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TLC5628IDWRG4 in technical solutions:

  1. Q: What is the TLC5628IDWRG4? A: The TLC5628IDWRG4 is a digital-to-analog converter (DAC) chip manufactured by Texas Instruments.

  2. Q: What is the resolution of the TLC5628IDWRG4? A: The TLC5628IDWRG4 has a resolution of 8 bits, meaning it can convert digital values into analog signals with 256 possible levels.

  3. Q: What is the supply voltage range for the TLC5628IDWRG4? A: The TLC5628IDWRG4 operates with a supply voltage range of 2.7V to 5.5V.

  4. Q: How many channels does the TLC5628IDWRG4 have? A: The TLC5628IDWRG4 has 8 channels, allowing it to simultaneously output analog signals on multiple channels.

  5. Q: What is the maximum output voltage range of the TLC5628IDWRG4? A: The TLC5628IDWRG4 can provide an output voltage range from VREF to GND, where VREF is the reference voltage supplied externally.

  6. Q: Can the TLC5628IDWRG4 be controlled using a microcontroller? A: Yes, the TLC5628IDWRG4 can be easily interfaced with a microcontroller using standard digital communication protocols such as SPI or I2C.

  7. Q: What is the settling time of the TLC5628IDWRG4? A: The settling time of the TLC5628IDWRG4 is typically 1.5µs, which is the time it takes for the output voltage to stabilize after a digital value is applied.

  8. Q: Can the TLC5628IDWRG4 be used in precision applications? A: While the TLC5628IDWRG4 is not specifically designed for high-precision applications, it can still provide accurate analog outputs for many general-purpose applications.

  9. Q: Does the TLC5628IDWRG4 have any built-in reference voltage source? A: No, the TLC5628IDWRG4 requires an external reference voltage source to determine the output voltage range.

  10. Q: What are some typical applications of the TLC5628IDWRG4? A: The TLC5628IDWRG4 is commonly used in applications such as motor control, audio systems, instrumentation, and industrial automation where precise analog outputs are required.

Please note that these answers are general and may vary depending on specific use cases and requirements.