Lihat spesifikasi untuk detail produk.
TLC2272QPWRG4Q1
Product Overview
Category
The TLC2272QPWRG4Q1 belongs to the category of operational amplifiers (op-amps).
Use
It is commonly used as a general-purpose operational amplifier for various analog applications.
Characteristics
- Low noise
- Low input offset voltage
- Rail-to-rail output
- Low power consumption
Package
The TLC2272QPWRG4Q1 comes in a small outline package (SOP) and is available in reel packaging.
Essence
This op-amp is essential for precision signal conditioning and amplification in automotive and industrial applications.
Packaging/Quantity
The TLC2272QPWRG4Q1 is typically packaged in reels containing 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 16V
- Input Offset Voltage: 300µV (max)
- Input Bias Current: 0.6pA (typ)
- Gain Bandwidth Product: 2.2MHz
- Slew Rate: 0.6V/µs
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The TLC2272QPWRG4Q1 has a standard 8-pin dual in-line package (DIP) configuration with the following pinout: 1. OUT1- 2. IN1- 3. IN1+ 4. V- 5. V+ 6. OUT1+ 7. NC 8. OUT2-
Functional Features
- Low noise performance for accurate signal processing
- Rail-to-rail output allows for maximum dynamic range
- Low power consumption for energy-efficient operation
Advantages and Disadvantages
Advantages
- High precision and accuracy
- Wide supply voltage range
- Suitable for automotive and industrial applications
Disadvantages
- Limited bandwidth compared to some high-speed op-amps
- Higher input bias current than certain precision op-amps
Working Principles
The TLC2272QPWRG4Q1 operates based on the principles of differential amplification, providing high gain and low distortion for precise signal amplification and conditioning.
Detailed Application Field Plans
The TLC2272QPWRG4Q1 is well-suited for the following application fields: - Automotive sensor interfaces - Industrial control systems - Signal conditioning circuits - Battery-powered instrumentation
Detailed and Complete Alternative Models
Some alternative models to the TLC2272QPWRG4Q1 include: - LM358 - MCP6002 - AD822
In conclusion, the TLC2272QPWRG4Q1 is a versatile operational amplifier with low noise, low power consumption, and rail-to-rail output, making it suitable for a wide range of precision analog applications in automotive and industrial settings.
Word Count: 409
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TLC2272QPWRG4Q1 dalam solusi teknis
What is the TLC2272QPWRG4Q1?
- The TLC2272QPWRG4Q1 is a dual operational amplifier designed for automotive applications, offering low power consumption and high input impedance.
What are the key features of the TLC2272QPWRG4Q1?
- The key features include low power consumption, rail-to-rail output swing, high input impedance, and wide supply voltage range.
What are the typical applications of the TLC2272QPWRG4Q1?
- Typical applications include sensor interfaces, signal conditioning, active filters, and precision instrumentation.
What is the operating voltage range of the TLC2272QPWRG4Q1?
- The operating voltage range is from 2.7V to 16V.
What is the quiescent current consumption of the TLC2272QPWRG4Q1?
- The quiescent current consumption is typically 900µA per channel.
Does the TLC2272QPWRG4Q1 have ESD protection?
- Yes, it has ESD protection up to 4kV.
What is the temperature range for the TLC2272QPWRG4Q1?
- The temperature range is from -40°C to 125°C.
Can the TLC2272QPWRG4Q1 be used in automotive applications?
- Yes, it is specifically designed for automotive applications and is AEC-Q100 qualified.
What is the package type of the TLC2272QPWRG4Q1?
- It comes in the small outline package (TSSOP) with PowerPAD™.
Is the TLC2272QPWRG4Q1 suitable for battery-powered applications?
- Yes, its low power consumption makes it suitable for battery-powered applications, such as portable devices and automotive systems.