Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TLC084ID
Lihat Detail Lembar Data

TLC084ID

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low power consumption, high precision, wide bandwidth
  • Package: DIP-14 (Dual In-Line Package with 14 pins)
  • Essence: The TLC084ID is a quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in tubes or reels, with a quantity of 50 units per tube/reel.

Specifications

  • Supply Voltage: ±2V to ±18V
  • Input Offset Voltage: 3mV (maximum)
  • Input Bias Current: 30nA (maximum)
  • Input Offset Current: 5nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.6V/µs (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The TLC084ID has a DIP-14 package with the following pin configuration:

__ __ VCC | 1 \/ 14 | OUT1 IN1 | 2 13 | IN4 IN2 | 3 12 | OUT4 IN3 | 4 11 | GND OUT2 | 5 10 | IN4 OUT3 | 6 9 | IN3 GND | 7 8 | IN2 -- --

Functional Features

  • Low noise and distortion
  • Rail-to-rail output swing capability
  • High input impedance and low input bias current
  • Wide supply voltage range
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low power consumption - High precision - Wide bandwidth - Rail-to-rail output swing

Disadvantages: - Limited number of channels (quad)

Working Principles

The TLC084ID is an operational amplifier that amplifies the difference between two input voltages. It operates by using a differential amplifier configuration, where the voltage difference between the inputs is amplified and then fed to the output stage. The device uses external resistors to set the desired gain and provides a high level of accuracy and stability.

Application Field Plans

The TLC084ID is commonly used in various applications, including:

  1. Audio amplification circuits
  2. Signal conditioning circuits
  3. Active filters
  4. Instrumentation amplifiers
  5. Voltage-controlled oscillators

Alternative Models

Here are some alternative models that can be used as substitutes for the TLC084ID:

  1. LM324
  2. TL084
  3. OP07
  4. AD822
  5. MCP6004

These alternatives offer similar functionality and can be chosen based on specific requirements and availability.

In conclusion, the TLC084ID is a versatile quad operational amplifier with low power consumption, high precision, and wide bandwidth. Its compact DIP-14 package makes it suitable for various general-purpose applications.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TLC084ID dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TLC084ID in technical solutions:

  1. Question: What is TLC084ID?
    Answer: TLC084ID is a quad operational amplifier (op-amp) that is commonly used in various electronic circuits.

  2. Question: What is the supply voltage range for TLC084ID?
    Answer: The supply voltage range for TLC084ID is typically between 3V and 32V.

  3. Question: What is the input offset voltage of TLC084ID?
    Answer: The input offset voltage of TLC084ID is typically around 2mV.

  4. Question: Can TLC084ID be used in low-power applications?
    Answer: Yes, TLC084ID is designed for low-power consumption and can be used in battery-powered devices.

  5. Question: What is the bandwidth of TLC084ID?
    Answer: The bandwidth of TLC084ID is typically around 1MHz.

  6. Question: Can TLC084ID be used in audio applications?
    Answer: Yes, TLC084ID can be used in audio applications such as amplifiers and filters.

  7. Question: Does TLC084ID have built-in protection features?
    Answer: Yes, TLC084ID has built-in short-circuit and thermal protection features to ensure safe operation.

  8. Question: Can TLC084ID operate in a wide temperature range?
    Answer: Yes, TLC084ID can operate in a temperature range of -40°C to +125°C.

  9. Question: Is TLC084ID suitable for precision applications?
    Answer: Yes, TLC084ID has low input offset voltage and low input bias current, making it suitable for precision applications.

  10. Question: Can multiple TLC084ID op-amps be used in the same circuit?
    Answer: Yes, multiple TLC084ID op-amps can be used in the same circuit to perform different functions or amplify multiple signals.

Please note that the answers provided are general and may vary depending on specific datasheet specifications and application requirements.