Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TL52055PWRE4
Lihat Detail Lembar Data

TL52055PWRE4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: PowerSO-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 1.5A
  • Quiescent Current: 60µA (typical)
  • Switching Frequency: 2.25MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TL52055PWRE4 has a PowerSO-8 package with the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching pin
  6. PGND: Power ground pin
  7. VOUT: Output voltage pin
  8. COMP: Compensation pin

Functional Features

  • High efficiency power management solution
  • Low power consumption for extended battery life
  • Wide input voltage range for versatile applications
  • Adjustable output voltage for flexibility
  • Overcurrent and thermal protection for enhanced safety
  • Fast transient response for stable operation

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power wastage - Low quiescent current prolongs battery life - Compact package size for space-constrained designs - Wide input voltage range allows compatibility with various power sources - Overcurrent and thermal protection ensure device safety

Disadvantages: - Limited output current may not be suitable for high-power applications - Higher cost compared to non-integrated solutions

Working Principles

The TL52055PWRE4 is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 0.8V and 3.6V. It utilizes a switching regulator topology to achieve high efficiency and low power consumption.

The IC incorporates a feedback mechanism to continuously monitor the output voltage and adjust the duty cycle of the internal switch accordingly. This control loop ensures a stable and accurate output voltage despite variations in the input voltage and load conditions.

Detailed Application Field Plans

The TL52055PWRE4 is commonly used in various battery-powered devices, such as:

  1. Mobile phones
  2. Tablets
  3. Portable media players
  4. Wearable devices
  5. IoT (Internet of Things) devices
  6. Wireless communication modules

Its compact size, wide input voltage range, and efficient power management make it suitable for applications where space, power efficiency, and battery life are critical factors.

Detailed and Complete Alternative Models

  1. TL52055PWR: Similar specifications and features, but without overcurrent and thermal protection.
  2. TL52055PWRE3: Previous version with slightly different pin configuration but similar functionality.
  3. TL52055PWRE5: Upgraded version with improved efficiency and lower quiescent current.

These alternative models provide options based on specific requirements and budget considerations while maintaining compatibility with the TL52055PWRE4's application field.

Word count: 413 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TL52055PWRE4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TL52055PWRE4 in technical solutions:

  1. Q: What is TL52055PWRE4? A: TL52055PWRE4 is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of TL52055PWRE4? A: TL52055PWRE4 offers multiple voltage regulators, power sequencing, and protection features, making it suitable for applications requiring precise power management.

  3. Q: What is the input voltage range supported by TL52055PWRE4? A: TL52055PWRE4 supports an input voltage range of typically 2.7V to 5.5V.

  4. Q: How many voltage regulators does TL52055PWRE4 have? A: TL52055PWRE4 has four voltage regulators, each capable of providing a different output voltage.

  5. Q: Can TL52055PWRE4 handle high current loads? A: Yes, TL52055PWRE4 can handle high current loads with its built-in current limit and thermal shutdown protection mechanisms.

  6. Q: Is TL52055PWRE4 suitable for battery-powered applications? A: Yes, TL52055PWRE4 is designed to be efficient and low-power, making it suitable for battery-powered applications.

  7. Q: Does TL52055PWRE4 support power sequencing? A: Yes, TL52055PWRE4 supports power sequencing, allowing for controlled startup and shutdown of different power domains.

  8. Q: Can TL52055PWRE4 operate in a wide temperature range? A: Yes, TL52055PWRE4 is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

  9. Q: What are the typical applications of TL52055PWRE4? A: TL52055PWRE4 is commonly used in portable devices, IoT devices, industrial equipment, and other applications requiring efficient power management.

  10. Q: Are there any evaluation boards or reference designs available for TL52055PWRE4? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help developers quickly prototype and integrate TL52055PWRE4 into their solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.