Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TCAN337DR
Lihat Detail Lembar Data

TCAN337DR

Product Overview

Category: Integrated Circuit (IC)

Use: TCAN337DR is a high-speed CAN transceiver designed for use in automotive and industrial applications. It provides reliable communication between microcontrollers and the CAN bus.

Characteristics: - High-speed data transmission - Low power consumption - Robust EMC performance - Wide operating temperature range - Enhanced ESD protection

Package: The TCAN337DR is available in a small outline integrated circuit (SOIC) package, which ensures easy integration into various electronic systems.

Essence: The essence of TCAN337DR lies in its ability to facilitate efficient and secure communication over the CAN bus, enabling seamless interaction between different components within a system.

Packaging/Quantity: The TCAN337DR is typically sold in reels containing 2500 units per reel.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 5 Mbps
  • Operating Temperature Range: -40°C to +125°C
  • Quiescent Current: 10 µA (typical)
  • Transmit Dominant Time-Out: 1 µs (minimum)
  • Receiver Input Threshold: ±200 mV (maximum)

Detailed Pin Configuration

The TCAN337DR features a total of 8 pins, each serving a specific function:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. TXD: Transmit data output
  4. RXD: Receive data input
  5. RS: Standby mode control
  6. VREF: Reference voltage output
  7. CANL: CAN low signal line
  8. CANH: CAN high signal line

Functional Features

  • High-speed CAN communication: The TCAN337DR supports data rates of up to 5 Mbps, ensuring fast and reliable transmission of information.
  • Low power consumption: With a quiescent current of only 10 µA, the transceiver minimizes power consumption, making it suitable for battery-powered applications.
  • Robust EMC performance: The device is designed to withstand electromagnetic interference, ensuring reliable operation in challenging environments.
  • Enhanced ESD protection: TCAN337DR incorporates enhanced electrostatic discharge (ESD) protection, safeguarding the IC against potential damage.

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Wide operating temperature range - Low power consumption - Robust EMC performance - Enhanced ESD protection

Disadvantages: - Limited pin configuration options - Relatively higher cost compared to some alternative models

Working Principles

The TCAN337DR operates based on the Controller Area Network (CAN) protocol. It receives data from a microcontroller through the RXD pin, encodes it, and transmits it over the CAN bus via the TXD pin. Similarly, it receives data from the CAN bus, decodes it, and sends it to the microcontroller for further processing.

Detailed Application Field Plans

The TCAN337DR is widely used in various automotive and industrial applications, including: - Automotive electronic control units (ECUs) - Industrial automation systems - Telematics devices - Motor control systems - Robotics - Energy management systems

Detailed and Complete Alternative Models

  1. MCP2551: This CAN transceiver offers similar features and performance to the TCAN337DR. It is available in different package options, providing flexibility in design.
  2. SN65HVD230: Another alternative with comparable specifications, the SN65HVD230 is known for its low-power operation and robustness in harsh environments.
  3. TJA1050: This popular CAN transceiver provides high-speed communication and is widely used in automotive applications.

These alternative models can be considered based on specific project requirements and design constraints.

Word count: 511 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TCAN337DR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TCAN337DR in technical solutions:

  1. Q: What is TCAN337DR? A: TCAN337DR is a high-speed CAN transceiver that provides robust communication between microcontrollers and CAN bus networks.

  2. Q: What are the key features of TCAN337DR? A: Some key features of TCAN337DR include high-speed data rates up to 5 Mbps, low electromagnetic emissions, and built-in protection against bus faults.

  3. Q: How can TCAN337DR be used in automotive applications? A: TCAN337DR can be used in automotive applications for tasks such as vehicle diagnostics, engine control, and communication between different electronic control units (ECUs).

  4. Q: Can TCAN337DR be used in industrial automation systems? A: Yes, TCAN337DR is suitable for industrial automation systems where reliable communication over CAN bus networks is required.

  5. Q: Is TCAN337DR compatible with other CAN transceivers? A: Yes, TCAN337DR is fully compatible with other CAN transceivers that comply with the CAN protocol standards.

  6. Q: What is the operating voltage range of TCAN337DR? A: TCAN337DR operates within a voltage range of 3.0V to 5.5V, making it compatible with a wide range of microcontrollers.

  7. Q: Does TCAN337DR support bus fault protection? A: Yes, TCAN337DR has built-in bus fault protection features such as thermal shutdown, undervoltage lockout, and overvoltage protection.

  8. Q: Can TCAN337DR handle long-distance communication on a CAN bus? A: TCAN337DR supports communication over long distances on a CAN bus by providing excellent signal integrity and noise immunity.

  9. Q: Is TCAN337DR suitable for low-power applications? A: Yes, TCAN337DR has a low standby current consumption and supports low-power modes, making it suitable for battery-powered or energy-efficient devices.

  10. Q: Are there any evaluation boards or development kits available for TCAN337DR? A: Yes, Texas Instruments provides evaluation boards and development kits that can be used to quickly prototype and evaluate TCAN337DR in various applications.

Please note that the answers provided here are general and may vary depending on specific use cases and requirements.