Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74LVCU04ADBR

SN74LVCU04ADBR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate Inverter
  • Characteristics: Low-voltage, CMOS technology
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Hex inverter gate
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 50MHz
  • Propagation Delay Time: 3.8ns (typical)
  • Input Capacitance: 2pF (typical)
  • Output Current: ±24mA

Detailed Pin Configuration

The SN74LVCU04ADBR has a total of 14 pins. The pin configuration is as follows:

  1. A1 - Input A for the first inverter
  2. Y1 - Output Y for the first inverter
  3. A2 - Input A for the second inverter
  4. Y2 - Output Y for the second inverter
  5. A3 - Input A for the third inverter
  6. Y3 - Output Y for the third inverter
  7. GND - Ground
  8. Y4 - Output Y for the fourth inverter
  9. A4 - Input A for the fourth inverter
  10. Y5 - Output Y for the fifth inverter
  11. A5 - Input A for the fifth inverter
  12. Y6 - Output Y for the sixth inverter
  13. A6 - Input A for the sixth inverter
  14. VCC - Power supply voltage

Functional Features

  • Hex Inverter: The SN74LVCU04ADBR consists of six independent inverter gates, each performing the logical inversion of its input signal.
  • Low-Voltage Operation: It operates at a low supply voltage range of 1.65V to 5.5V, making it suitable for low-power applications.
  • CMOS Technology: The IC is built using complementary metal-oxide-semiconductor (CMOS) technology, providing high noise immunity and low power consumption.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems. - Low power consumption makes it suitable for battery-powered devices. - High noise immunity ensures reliable operation in noisy environments.

Disadvantages: - Limited maximum operating frequency compared to some other logic gate ICs. - Input capacitance may affect performance in high-speed applications.

Working Principles

The SN74LVCU04ADBR operates based on the principles of CMOS logic. Each inverter gate consists of a PMOS transistor and an NMOS transistor connected in series. When the input signal is high, the PMOS transistor turns off, and the NMOS transistor turns on, resulting in a low output. Conversely, when the input signal is low, the PMOS transistor turns on, and the NMOS transistor turns off, producing a high output.

Detailed Application Field Plans

The SN74LVCU04ADBR can be used in various digital logic applications, including but not limited to: - Microcontrollers and microprocessors - Data communication systems - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the SN74LVCU04ADBR are: - CD4069UB: Hex inverter IC from Texas Instruments - MC74VHC1GU04: Single inverter IC from ON Semiconductor - 74HC04: Hex inverter IC from NXP Semiconductors

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 408 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74LVCU04ADBR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74LVCU04ADBR in technical solutions:

  1. Q: What is SN74LVCU04ADBR? A: SN74LVCU04ADBR is a hex inverter IC (integrated circuit) that converts logic level signals.

  2. Q: What is the voltage range supported by SN74LVCU04ADBR? A: SN74LVCU04ADBR supports a voltage range of 1.65V to 5.5V.

  3. Q: What is the maximum output current of SN74LVCU04ADBR? A: The maximum output current of SN74LVCU04ADBR is typically 32mA.

  4. Q: Can SN74LVCU04ADBR be used for level shifting between different voltage domains? A: Yes, SN74LVCU04ADBR can be used for level shifting between different voltage domains due to its wide voltage range support.

  5. Q: How many inverters are there in SN74LVCU04ADBR? A: SN74LVCU04ADBR consists of six independent inverters.

  6. Q: What is the propagation delay of SN74LVCU04ADBR? A: The propagation delay of SN74LVCU04ADBR is typically 4.3ns.

  7. Q: Can SN74LVCU04ADBR be used in high-speed applications? A: Yes, SN74LVCU04ADBR can be used in high-speed applications as it has a fast propagation delay.

  8. Q: Is SN74LVCU04ADBR compatible with TTL (Transistor-Transistor Logic) inputs? A: Yes, SN74LVCU04ADBR is compatible with TTL inputs as it has TTL-compatible input thresholds.

  9. Q: Can SN74LVCU04ADBR be used in battery-powered applications? A: Yes, SN74LVCU04ADBR can be used in battery-powered applications as it supports a wide voltage range, including low voltages.

  10. Q: What is the package type of SN74LVCU04ADBR? A: SN74LVCU04ADBR is available in a small-outline integrated circuit (SOIC) package.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.