Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74LVCH244ADWR
Lihat Detail Lembar Data

SN74LVCH244ADWR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: Low-Voltage, High-Speed, Octal Bus Buffer with 3-State Outputs
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Buffering and driving signals in digital systems
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 400 MHz
  • Number of Channels: 8
  • Output Drive Capability: ±24 mA
  • Propagation Delay Time: 2.5 ns (typical)

Detailed Pin Configuration

The SN74LVCH244ADWR has a total of 20 pins, which are arranged as follows:

__ __ A1 | 1 20 | VCC B1 | 2 19 | B2 A2 | 3 18 | A3 B3 | 4 17 | B4 A4 | 5 16 | A5 B5 | 6 15 | B6 A6 | 7 14 | A7 B7 | 8 13 | B8 GND | 9 12 | OE# NC | 10 11 | Y --------

Functional Features

  • Low-voltage operation allows compatibility with various logic levels.
  • High-speed performance enables efficient signal buffering.
  • 3-state outputs provide flexibility in bus-oriented applications.
  • Wide supply voltage range allows integration into different systems.
  • High output drive capability ensures reliable signal transmission.

Advantages and Disadvantages

Advantages: - Low-voltage operation enables compatibility with modern digital systems. - High-speed performance allows for efficient data transfer. - 3-state outputs provide flexibility in bus-oriented applications. - Wide supply voltage range allows integration into various systems.

Disadvantages: - Limited number of channels (8) may not be sufficient for complex systems. - Propagation delay time may affect timing-sensitive applications.

Working Principles

The SN74LVCH244ADWR is an octal buffer/line driver IC that operates at low voltages. It receives input signals and buffers them to drive the corresponding outputs. The 3-state outputs allow the device to be connected to a common bus, enabling multiple devices to share the same communication lines. The IC operates by amplifying and shaping the input signals, ensuring proper signal levels and driving capability.

Detailed Application Field Plans

The SN74LVCH244ADWR is commonly used in various digital systems, including:

  1. Microcontrollers: The IC can be used to interface microcontrollers with external devices, such as sensors, actuators, or displays.
  2. Communication Systems: It is suitable for buffering and driving signals in communication systems, such as UART, SPI, or I2C interfaces.
  3. Memory Modules: The IC can be utilized in memory modules to ensure proper signal integrity during data read/write operations.
  4. Industrial Automation: It finds application in industrial automation systems for signal buffering and driving in control circuits.

Detailed and Complete Alternative Models

  1. SN74LVC244A: Similar to SN74LVCH244ADWR but operates at a higher voltage range (1.65V to 5.5V).
  2. SN74LVTH244A: Offers similar functionality but includes voltage translation capabilities for mixed-voltage systems.
  3. SN74LVX244: Provides similar buffering and driving features but operates at a wider voltage range (2V to 5.5V).

These alternative models offer similar functionality with slight variations in voltage range, voltage translation capabilities, or operating speed.

Word count: 529 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74LVCH244ADWR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74LVCH244ADWR:

  1. Q: What is SN74LVCH244ADWR? A: SN74LVCH244ADWR is a specific type of integrated circuit (IC) known as an octal buffer/line driver with 3-state outputs.

  2. Q: What is the purpose of SN74LVCH244ADWR? A: This IC is commonly used for signal buffering and line driving applications, where it can amplify and control signals between different parts of a circuit.

  3. Q: What voltage levels does SN74LVCH244ADWR support? A: SN74LVCH244ADWR supports a wide range of voltage levels, typically from 1.65V to 5.5V.

  4. Q: How many channels does SN74LVCH244ADWR have? A: SN74LVCH244ADWR has 8 channels, which means it can handle up to 8 separate input/output lines.

  5. Q: Can SN74LVCH244ADWR handle bidirectional communication? A: Yes, SN74LVCH244ADWR supports bidirectional communication, allowing signals to be transmitted in both directions.

  6. Q: What is the maximum data rate supported by SN74LVCH244ADWR? A: SN74LVCH244ADWR can handle data rates up to 400 Mbps, making it suitable for high-speed applications.

  7. Q: Does SN74LVCH244ADWR have built-in protection features? A: Yes, SN74LVCH244ADWR includes built-in ESD protection, which helps safeguard against electrostatic discharge events.

  8. Q: Can SN74LVCH244ADWR operate in a wide temperature range? A: Yes, SN74LVCH244ADWR is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  9. Q: What is the power supply voltage required for SN74LVCH244ADWR? A: SN74LVCH244ADWR requires a power supply voltage of 1.65V to 5.5V, depending on the specific application requirements.

  10. Q: Are there any recommended applications for SN74LVCH244ADWR? A: Yes, SN74LVCH244ADWR is commonly used in various applications such as data communication systems, industrial automation, and automotive electronics.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.