Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74LVC863ADWRG4
Lihat Detail Lembar Data

SN74LVC863ADWRG4

Product Overview

Category

SN74LVC863ADWRG4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal processing and data transmission.

Characteristics

  • Low-voltage CMOS technology
  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Schmitt-trigger inputs for noise immunity

Package

SN74LVC863ADWRG4 is available in a small-outline package (SOIC) with 20 pins.

Essence

The essence of SN74LVC863ADWRG4 lies in its ability to process and transmit signals efficiently, while consuming low power and providing noise immunity.

Packaging/Quantity

SN74LVC863ADWRG4 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage Levels: 0V to VCC
  • Output Voltage Levels: 0V to VCC
  • Maximum Propagation Delay: 3.8ns
  • Maximum Operating Frequency: 100MHz

Detailed Pin Configuration

  1. GND (Ground)
  2. A0 (Input A0)
  3. A1 (Input A1)
  4. A2 (Input A2)
  5. A3 (Input A3)
  6. A4 (Input A4)
  7. A5 (Input A5)
  8. A6 (Input A6)
  9. A7 (Input A7)
  10. OE (Output Enable)
  11. B0 (Input B0)
  12. B1 (Input B1)
  13. B2 (Input B2)
  14. B3 (Input B3)
  15. B4 (Input B4)
  16. B5 (Input B5)
  17. B6 (Input B6)
  18. B7 (Input B7)
  19. VCC (Supply Voltage)
  20. GND (Ground)

Functional Features

  • 8-bit bidirectional data bus
  • Output enable control for tristate operation
  • Schmitt-trigger inputs for noise immunity
  • High-speed operation for efficient signal processing
  • Wide operating voltage range for compatibility with various systems

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Noise immunity due to Schmitt-trigger inputs
  • Wide operating voltage range allows compatibility with different systems
  • High-speed operation for efficient signal processing

Disadvantages

  • Limited number of input/output pins (20 in this case)
  • May require additional external components for specific applications

Working Principles

SN74LVC863ADWRG4 operates based on CMOS technology, which allows for low-voltage operation and low power consumption. It uses a combination of logic gates and flip-flops to process and transmit signals. The Schmitt-trigger inputs provide noise immunity by ensuring that the input signals are properly interpreted even in the presence of noise.

Detailed Application Field Plans

SN74LVC863ADWRG4 finds applications in various electronic devices, including but not limited to: - Data communication systems - Microcontrollers - Industrial automation equipment - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN74LVC863ADWRG4 are: - SN74LVC862ADWRG4 - SN74LVC864ADWRG4 - SN74LVC861ADWRG4 - SN74LVC865ADWRG4

These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable IC for specific applications.

Word count: 455 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74LVC863ADWRG4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74LVC863ADWRG4:

  1. Q: What is the SN74LVC863ADWRG4? A: The SN74LVC863ADWRG4 is a high-speed, low-voltage, 10-bit bus switch with 3-state outputs.

  2. Q: What is the voltage range supported by SN74LVC863ADWRG4? A: It supports a voltage range from 1.65V to 5.5V.

  3. Q: What is the maximum data rate supported by SN74LVC863ADWRG4? A: It can support data rates up to 400 Mbps.

  4. Q: How many channels does SN74LVC863ADWRG4 have? A: It has 10 channels, allowing it to switch 10 different signals.

  5. Q: Can SN74LVC863ADWRG4 be used for bidirectional communication? A: Yes, it can be used for bidirectional communication as it supports both input and output signals.

  6. Q: What is the power supply voltage required for SN74LVC863ADWRG4? A: It requires a power supply voltage between 1.65V and 5.5V.

  7. Q: Does SN74LVC863ADWRG4 have built-in ESD protection? A: Yes, it has built-in ESD protection, making it more robust against electrostatic discharge.

  8. Q: Can SN74LVC863ADWRG4 handle hot-swapping of signals? A: Yes, it has hot-swappable I/Os, allowing for safe insertion and removal of signals while the system is powered.

  9. Q: What is the typical propagation delay of SN74LVC863ADWRG4? A: The typical propagation delay is around 2.5 ns.

  10. Q: Can SN74LVC863ADWRG4 be used in automotive applications? A: Yes, it is qualified for automotive applications and can operate in a wide temperature range.

Please note that these answers are general and may vary depending on the specific application and use case. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.