Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74LVC3G07DCUTG4
Lihat Detail Lembar Data

SN74LVC3G07DCUTG4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Driver
  • Characteristics:
    • Low-voltage CMOS technology
    • Triple buffer/driver with open-drain outputs
    • High-speed operation
    • Wide operating voltage range
  • Package: SOT-23-6
  • Essence: The SN74LVC3G07DCUTG4 is a triple buffer/driver IC designed for low-voltage applications. It provides high-speed signal buffering and driving capabilities with open-drain outputs.
  • Packaging/Quantity: Cut Tape, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 100 MHz
  • Maximum Propagation Delay: 2.8 ns
  • Maximum Output Current: ±32 mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74LVC3G07DCUTG4 has a total of 6 pins arranged as follows:

___________ OE | 1 6 | VCC IN1/A1 | 2 5 | OUT1/Y1 IN2/A2 | 3 4 | OUT2/Y2 ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Triple Buffer/Driver: The IC features three independent buffers/drivers that can be used to amplify or buffer digital signals.
  • Open-Drain Outputs: The outputs are designed as open-drain, allowing them to be connected to other devices or circuits without conflicts.
  • High-Speed Operation: The IC operates at high speeds, making it suitable for applications that require fast signal propagation.
  • Wide Operating Voltage Range: It can operate within a wide voltage range, making it compatible with various low-voltage systems.

Advantages and Disadvantages

Advantages

  • Low-voltage operation makes it suitable for battery-powered devices.
  • Open-drain outputs provide flexibility in connecting to other devices.
  • High-speed operation allows for quick signal transmission.

Disadvantages

  • Limited output current may not be suitable for driving heavy loads.
  • SOT-23-6 package may require careful handling during assembly.

Working Principles

The SN74LVC3G07DCUTG4 works by receiving digital input signals on the IN1/A1 and IN2/A2 pins. These signals are then amplified and buffered by the internal circuitry. The resulting output signals are available on the OUT1/Y1 and OUT2/Y2 pins. The OE pin is used to enable or disable the outputs.

Detailed Application Field Plans

The SN74LVC3G07DCUTG4 is commonly used in various electronic applications, including: - Battery-powered devices - Communication systems - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SN74LVC3G07DCUTG4 include: - SN74LVC3G07DCTR: Tape and Reel packaging, 3000 units per reel - SN74LVC3G07DBVR: SOT-23-5 package, 2500 units per reel - SN74LVC3G07DCKR: SC-70-6 package, 3000 units per reel

These alternative models can be considered based on specific requirements such as package size, quantity, and availability.

Word count: 399 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74LVC3G07DCUTG4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74LVC3G07DCUTG4 in technical solutions:

  1. Q: What is SN74LVC3G07DCUTG4? A: SN74LVC3G07DCUTG4 is a triple buffer/driver with open-drain outputs, commonly used in digital logic applications.

  2. Q: What is the voltage range supported by SN74LVC3G07DCUTG4? A: SN74LVC3G07DCUTG4 supports a wide voltage range from 1.65V to 5.5V, making it compatible with various power supply levels.

  3. Q: What is the maximum output current of SN74LVC3G07DCUTG4? A: The maximum output current of SN74LVC3G07DCUTG4 is typically 32mA, allowing it to drive moderate loads.

  4. Q: Can SN74LVC3G07DCUTG4 be used as a level shifter? A: Yes, SN74LVC3G07DCUTG4 can be used as a level shifter to convert signals between different voltage domains.

  5. Q: How many input/output channels does SN74LVC3G07DCUTG4 have? A: SN74LVC3G07DCUTG4 has three independent input/output channels, each with an open-drain output.

  6. Q: Is SN74LVC3G07DCUTG4 suitable for bidirectional communication? A: Yes, SN74LVC3G07DCUTG4 is suitable for bidirectional communication as it has open-drain outputs that can be pulled low or left floating.

  7. Q: What is the propagation delay of SN74LVC3G07DCUTG4? A: The propagation delay of SN74LVC3G07DCUTG4 is typically around 5.8ns, making it suitable for high-speed applications.

  8. Q: Can SN74LVC3G07DCUTG4 be used in automotive applications? A: Yes, SN74LVC3G07DCUTG4 is qualified for automotive applications and can operate in a wide temperature range.

  9. Q: Does SN74LVC3G07DCUTG4 have built-in ESD protection? A: Yes, SN74LVC3G07DCUTG4 has built-in ESD protection, ensuring robustness against electrostatic discharge events.

  10. Q: What package options are available for SN74LVC3G07DCUTG4? A: SN74LVC3G07DCUTG4 is available in various package options, including SOT-23 and VSSOP, providing flexibility for different PCB layouts.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.