Lihat spesifikasi untuk detail produk.
SN74LS645-1NSR
Product Overview
Category
SN74LS645-1NSR belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for signal transmission and conversion.
Characteristics
- High-speed operation
- Low power consumption
- Wide operating voltage range
- Compatibility with various logic families
Package
SN74LS645-1NSR is available in a small outline package (SOP) format.
Essence
The essence of SN74LS645-1NSR lies in its ability to efficiently convert and transmit signals within electronic devices.
Packaging/Quantity
This product is typically packaged in reels, with each reel containing a specific quantity of SN74LS645-1NSR ICs.
Specifications
- Supply Voltage: 4.75V to 5.25V
- Operating Temperature Range: -40°C to +85°C
- Input Voltage: 0V to VCC
- Output Voltage: 0V to VCC
- Maximum Propagation Delay: 10ns
Detailed Pin Configuration
SN74LS645-1NSR has a total of 20 pins, which are assigned specific functions as follows:
- A1: Input A1
- B1: Input B1
- Y1: Output Y1
- GND: Ground
- A2: Input A2
- B2: Input B2
- Y2: Output Y2
- DIR: Direction Control
- OE: Output Enable
- VCC: Power Supply
- A3: Input A3
- B3: Input B3
- Y3: Output Y3
- GND: Ground
- A4: Input A4
- B4: Input B4
- Y4: Output Y4
- DIR: Direction Control
- OE: Output Enable
- VCC: Power Supply
Functional Features
- Bidirectional signal transmission
- Four independent data channels
- Direction control for selecting input/output mode
- Output enable for enabling/disabling the outputs
Advantages and Disadvantages
Advantages
- High-speed operation allows for efficient signal transmission.
- Low power consumption helps in reducing energy usage.
- Wide operating voltage range ensures compatibility with various systems.
- Compatibility with different logic families enhances versatility.
Disadvantages
- Limited number of data channels may restrict certain applications.
- Propagation delay of 10ns may not be suitable for ultra-fast operations.
Working Principles
SN74LS645-1NSR operates by receiving input signals through the A and B pins, which are then processed based on the direction control and output enable settings. The processed signals are then transmitted through the corresponding Y pins.
Detailed Application Field Plans
SN74LS645-1NSR finds applications in various electronic devices, including but not limited to: - Data communication systems - Industrial automation equipment - Automotive electronics - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to SN74LS645-1NSR include: - SN74LS646-1NSR - SN74LS647-1NSR - SN74LS648-1NSR - SN74LS649-1NSR
These models can be considered as alternatives depending on specific requirements and system compatibility.
Word count: 400 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74LS645-1NSR dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of SN74LS645-1NSR:
1. What is the SN74LS645-1NSR? The SN74LS645-1NSR is a type of integrated circuit (IC) commonly used as a bus transceiver. It allows bidirectional data transfer between two buses with different voltage levels.
2. What is the voltage range supported by SN74LS645-1NSR? SN74LS645-1NSR supports a voltage range of 4.5V to 5.5V.
3. How many channels does SN74LS645-1NSR have? SN74LS645-1NSR has 8 channels, allowing it to handle 8-bit data transfers.
4. Can SN74LS645-1NSR be used for level shifting? Yes, SN74LS645-1NSR can be used for level shifting as it supports bidirectional voltage translation.
5. What is the maximum data rate supported by SN74LS645-1NSR? SN74LS645-1NSR can support data rates up to 24 MHz.
6. Is SN74LS645-1NSR compatible with TTL logic? Yes, SN74LS645-1NSR is compatible with TTL (Transistor-Transistor Logic) logic levels.
7. Can SN74LS645-1NSR be used in both parallel and serial communication systems? Yes, SN74LS645-1NSR can be used in both parallel and serial communication systems, depending on the application requirements.
8. Does SN74LS645-1NSR require external pull-up or pull-down resistors? No, SN74LS645-1NSR has built-in pull-up resistors, eliminating the need for external resistors.
9. What is the power supply voltage required for SN74LS645-1NSR? SN74LS645-1NSR requires a power supply voltage of 5V.
10. Can SN74LS645-1NSR be used in automotive applications? No, SN74LS645-1NSR is not recommended for automotive applications as it does not meet the necessary automotive standards.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.