SN74HC174DRE4 belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for data storage and manipulation.
SN74HC174DRE4 is available in a standard 16-pin SOIC (Small Outline Integrated Circuit) package.
The essence of SN74HC174DRE4 lies in its ability to store and manipulate digital data efficiently.
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
SN74HC174DRE4 operates based on the principles of sequential logic. The clock pulse triggers the flip-flops, allowing data to be stored or transferred. The clear input resets all flip-flops to a known state, ensuring reliable operation.
SN74HC174DRE4 finds applications in various fields, including: 1. Digital communication systems 2. Computer peripherals 3. Industrial automation 4. Consumer electronics 5. Automotive electronics
These alternative models offer similar functionality and characteristics to SN74HC174DRE4, providing options for different design requirements.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of SN74HC174DRE4 in technical solutions:
Q: What is SN74HC174DRE4? A: SN74HC174DRE4 is a hex D-type flip-flop integrated circuit (IC) that can store and manipulate digital signals.
Q: What is the voltage supply range for SN74HC174DRE4? A: The voltage supply range for SN74HC174DRE4 is typically between 2V and 6V.
Q: How many flip-flops are there in SN74HC174DRE4? A: SN74HC174DRE4 contains six independent D-type flip-flops.
Q: What is the maximum clock frequency supported by SN74HC174DRE4? A: SN74HC174DRE4 can operate at a maximum clock frequency of 25 MHz.
Q: Can SN74HC174DRE4 be used for both rising and falling edge triggering? A: Yes, SN74HC174DRE4 supports both rising and falling edge triggering based on the input signal.
Q: What is the output drive capability of SN74HC174DRE4? A: SN74HC174DRE4 has a typical output drive capability of ±6 mA.
Q: Is SN74HC174DRE4 compatible with other logic families? A: Yes, SN74HC174DRE4 is compatible with other CMOS logic families.
Q: Can SN74HC174DRE4 be used in high-speed applications? A: Yes, SN74HC174DRE4 is designed for high-speed operation and can be used in various high-speed applications.
Q: What is the power dissipation of SN74HC174DRE4? A: The power dissipation of SN74HC174DRE4 is typically around 20 mW.
Q: Can SN74HC174DRE4 be used in both commercial and industrial applications? A: Yes, SN74HC174DRE4 is suitable for use in both commercial and industrial applications due to its wide operating temperature range and robustness.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.