Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74HC112N

SN74HC112N

Product Overview

Category

SN74HC112N belongs to the category of integrated circuits (ICs).

Use

It is commonly used in digital logic applications.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Schmitt-trigger inputs for noise immunity
  • Compatible with TTL and CMOS logic levels

Package

SN74HC112N is available in a DIP (Dual In-line Package) format.

Essence

The essence of SN74HC112N lies in its ability to perform logical operations efficiently and reliably.

Packaging/Quantity

SN74HC112N is typically packaged in tubes or reels, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage: 2V to 6V
  • High-Level Input Voltage: 2V to VCC + 0.5V
  • Low-Level Input Voltage: -0.5V to 0.8V
  • High-Level Output Voltage: VCC - 0.5V
  • Low-Level Output Voltage: 0.1V
  • Maximum Operating Frequency: 54 MHz

Detailed Pin Configuration

SN74HC112N consists of 16 pins, each serving a specific function:

  1. CLR (Clear)
  2. CLK (Clock)
  3. J (Data Input J)
  4. K (Data Input K)
  5. Q (Output Q)
  6. GND (Ground)
  7. Q̅ (Complementary Output Q)
  8. VCC (Supply Voltage)

Functional Features

SN74HC112N offers the following functional features:

  • Dual negative-edge triggered JK flip-flop
  • Asynchronous clear input
  • Synchronous clock input
  • Direct set and reset inputs
  • Buffered outputs for cascading

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient processing of digital signals.
  • Wide operating voltage range enables compatibility with various systems.
  • Low power consumption reduces energy requirements.
  • Schmitt-trigger inputs provide noise immunity, ensuring reliable performance.
  • Compatibility with TTL and CMOS logic levels enhances versatility.

Disadvantages

  • Limited maximum operating frequency may restrict its use in high-speed applications.
  • Availability in DIP package format may not be suitable for space-constrained designs.

Working Principles

SN74HC112N operates based on the principles of JK flip-flops. It utilizes clock signals to synchronize the input data and performs logical operations accordingly. The clear input allows for resetting the flip-flop, while set and reset inputs enable direct control over the output states.

Detailed Application Field Plans

SN74HC112N finds application in various fields, including:

  1. Digital electronics
  2. Microcontrollers
  3. Communication systems
  4. Industrial automation
  5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74HC112N are:

  1. CD4027
  2. MC14027
  3. 74LS112
  4. 74HCT112

These models can be considered as alternatives based on specific project requirements.

Word count: 346 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74HC112N dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74HC112N in technical solutions:

  1. Q: What is SN74HC112N? A: SN74HC112N is a dual J-K flip-flop integrated circuit (IC) that can be used in various digital logic applications.

  2. Q: What is the operating voltage range for SN74HC112N? A: SN74HC112N operates within a voltage range of 2V to 6V.

  3. Q: What is the maximum clock frequency supported by SN74HC112N? A: SN74HC112N can support clock frequencies up to 25 MHz.

  4. Q: How many flip-flops are there in SN74HC112N? A: SN74HC112N contains two independent J-K flip-flops.

  5. Q: What is the purpose of the J and K inputs in SN74HC112N? A: The J and K inputs are used to control the state of the flip-flops and determine the output based on the clock signal.

  6. Q: Can SN74HC112N be used as a counter? A: Yes, SN74HC112N can be used as a basic counter by cascading multiple ICs together.

  7. Q: What is the output drive capability of SN74HC112N? A: SN74HC112N has a standard output drive capability of 6 mA.

  8. Q: Is SN74HC112N compatible with TTL logic levels? A: Yes, SN74HC112N is compatible with both CMOS and TTL logic levels.

  9. Q: Can SN74HC112N be used in high-speed applications? A: Yes, SN74HC112N is designed for high-speed operation and can be used in applications that require fast switching.

  10. Q: What are some common applications of SN74HC112N? A: SN74HC112N can be used in various applications such as counters, frequency dividers, data storage, and sequential logic circuits.

Please note that these answers are general and may vary depending on the specific requirements and use cases.