The SN74HC112DRG4 has a total of 16 pins. The pin configuration is as follows:
The SN74HC112DRG4 is a dual J-K flip-flop with clear inputs. It operates based on the positive-edge triggered clock input. The J-K flip-flop is a fundamental building block in digital logic circuits, capable of storing one bit of information.
When the clock input transitions from low to high (positive edge), the state of the flip-flop is determined by the values of the J and K inputs. The Q outputs represent the stored states, while the complementary outputs (Q̅) provide the inverted versions.
The clear inputs (CLR) allow resetting the flip-flops to a known state. When the clear input is activated, both flip-flops are forced into the cleared state (Q = 0).
The SN74HC112DRG4 can be used in various digital systems and applications, including:
These alternative models offer similar functionality and can be used as substitutes for the SN74HC112DRG4 in various applications.
In conclusion, the SN74HC112DRG4 is a versatile integrated circuit that provides dual J-K flip-flop functionality with clear inputs. Its high-speed operation, wide voltage range, and compact package make it suitable for a wide range of digital logic applications.
Sure! Here are 10 common questions and answers related to the application of SN74HC112DRG4 in technical solutions:
Q: What is SN74HC112DRG4? A: SN74HC112DRG4 is a dual J-K flip-flop integrated circuit (IC) that can be used in various digital logic applications.
Q: What is the operating voltage range for SN74HC112DRG4? A: The operating voltage range for SN74HC112DRG4 is typically between 2V and 6V.
Q: What is the maximum clock frequency supported by SN74HC112DRG4? A: SN74HC112DRG4 can support clock frequencies up to 25 MHz.
Q: How many flip-flops are there in SN74HC112DRG4? A: SN74HC112DRG4 contains two independent J-K flip-flops.
Q: What is the output drive capability of SN74HC112DRG4? A: SN74HC112DRG4 has a standard output drive capability of 6 mA.
Q: Can SN74HC112DRG4 be used in both synchronous and asynchronous applications? A: Yes, SN74HC112DRG4 can be used in both synchronous and asynchronous applications.
Q: What is the power supply current consumption of SN74HC112DRG4? A: The power supply current consumption of SN74HC112DRG4 is typically around 8 mA.
Q: Does SN74HC112DRG4 have any built-in protection features? A: SN74HC112DRG4 has built-in diode clamps to minimize the effects of electrostatic discharge (ESD).
Q: Can SN74HC112DRG4 be used in high-speed applications? A: Yes, SN74HC112DRG4 is designed to operate at high speeds and can be used in high-speed applications.
Q: What are some typical applications of SN74HC112DRG4? A: SN74HC112DRG4 can be used in various applications such as counters, frequency dividers, data storage, and control circuits.
Please note that these answers are general and may vary depending on specific design considerations and requirements.