Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74CBTK16245DL
Product Overview
- Category: Integrated Circuit (IC)
- Use: Signal Switching and Level Shifting
- Characteristics: High-speed, low-power, bidirectional voltage level translator
- Package: TSSOP (Thin Shrink Small Outline Package)
- Essence: Translates signals between different voltage levels in electronic systems
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Number of Channels: 16
- Voltage Translation Range: 1.2V to 3.6V
- Maximum Data Rate: 100 Mbps
- Supply Voltage Range: 1.65V to 3.6V
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The SN74CBTK16245DL has a total of 48 pins, divided into two groups:
Group A (pins 1-24)
- VCCA: Power supply for the A-side circuitry
- GND: Ground reference for the A-side circuitry
- OEAB: Output Enable for channels 1-8
- I/O1A-I/O8A: Bidirectional data input/output pins for channels 1-8
- DIR: Direction control input
- OEBA: Output Enable for channels 9-16
- I/O9A-I/O16A: Bidirectional data input/output pins for channels 9-16
Group B (pins 25-48)
- VCCB: Power supply for the B-side circuitry
- GND: Ground reference for the B-side circuitry
- OEBA: Output Enable for channels 17-24
- I/O17B-I/O24B: Bidirectional data input/output pins for channels 17-24
- DIR: Direction control input
- OEAB: Output Enable for channels 25-32
- I/O25B-I/O32B: Bidirectional data input/output pins for channels 25-32
Functional Features
- Bidirectional voltage level translation between two independent voltage domains
- Automatic direction control based on the DIR pin
- Low power consumption and high-speed operation
- Supports a wide range of supply voltages
- ESD protection on all pins
Advantages and Disadvantages
Advantages
- High-speed data transmission up to 100 Mbps
- Wide voltage translation range for compatibility with various systems
- Low power consumption for energy-efficient designs
- ESD protection ensures robustness in harsh environments
- Compact TSSOP package for space-constrained applications
Disadvantages
- Limited number of channels (16)
- Not suitable for high-voltage applications (>3.6V)
Working Principles
The SN74CBTK16245DL is designed to translate signals between two different voltage domains, typically used in mixed-voltage systems. It utilizes a bidirectional voltage level shifting technique to ensure seamless communication between devices operating at different voltage levels.
The direction of signal flow is controlled by the DIR pin. When DIR is set to logic low, data is transferred from the A-side to the B-side. Conversely, when DIR is set to logic high, data flows from the B-side to the A-side. The OEAB and OEBA pins are used to enable or disable the output buffers for each channel.
Detailed Application Field Plans
The SN74CBTK16245DL finds applications in various electronic systems where voltage translation is required. Some common application fields include:
- Microcontrollers and microprocessors interfacing with peripherals operating at different voltage levels.
- Communication systems involving multiple voltage domains, such as UART, SPI, or I2C interfaces.
- Battery-powered devices where low power consumption is crucial, such as portable consumer electronics.
- Industrial automation systems where different subsystems operate at distinct voltage levels.
- Automotive electronics for level shifting between automotive-specific voltage domains.
Detailed and Complete Alternative Models
- SN74CBTK16245DGGR: Similar to SN74CBTK16245DL but offered in a different package (TSSOP-48).
- SN74CBTK16245DGGT: Similar to SN74CBTK16245DL but offered in a different package (TSSOP-48).
- SN74CBTK16245DGVR: Similar to SN74CBTK16245DL but offered in a different package (TVSOP-48).
These alternative models provide similar functionality and characteristics but may differ in package type or quantity per reel.
Word count: 615 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74CBTK16245DL dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of SN74CBTK16245DL in technical solutions:
Q: What is SN74CBTK16245DL?
A: SN74CBTK16245DL is a 16-bit bus switch with 3-state outputs, designed for high-speed digital applications.
Q: What is the maximum operating voltage for SN74CBTK16245DL?
A: The maximum operating voltage for SN74CBTK16245DL is typically 3.6V.
Q: Can SN74CBTK16245DL be used for bidirectional level shifting?
A: Yes, SN74CBTK16245DL can be used for bidirectional level shifting between different voltage domains.
Q: What is the maximum data rate supported by SN74CBTK16245DL?
A: SN74CBTK16245DL supports high-speed data rates up to 400 Mbps.
Q: How many channels does SN74CBTK16245DL have?
A: SN74CBTK16245DL has 16 channels, allowing it to switch 16 lines simultaneously.
Q: Can SN74CBTK16245DL handle hot-swapping of devices?
A: Yes, SN74CBTK16245DL is designed to support hot-swapping of devices without causing any damage.
Q: Does SN74CBTK16245DL have built-in ESD protection?
A: Yes, SN74CBTK16245DL incorporates built-in ESD protection to safeguard against electrostatic discharge.
Q: What is the power supply voltage range for SN74CBTK16245DL?
A: The power supply voltage range for SN74CBTK16245DL is typically from 2.3V to 3.6V.
Q: Can SN74CBTK16245DL be used in both digital and analog applications?
A: No, SN74CBTK16245DL is specifically designed for digital applications and may not be suitable for analog signals.
Q: Is SN74CBTK16245DL available in different package options?
A: Yes, SN74CBTK16245DL is available in various package options, such as TSSOP and VFBGA, to suit different design requirements.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.