Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74CBTD3306CDRE4
Lihat Detail Lembar Data

SN74CBTD3306CDRE4

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Switching and Level Shifting
  • Characteristics: High-speed, Low-power, Bidirectional
  • Package: 14-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Digital Multiplexer/Demultiplexer
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2 V to 5.5 V
  • Input Voltage Range: 0 V to VCC
  • Output Voltage Range: 0 V to VCC
  • Maximum On-State Resistance: 5 Ω
  • Maximum Propagation Delay Time: 3.5 ns
  • Maximum Operating Frequency: 100 MHz

Detailed Pin Configuration

  1. A0 - Control Input A
  2. A1 - Control Input B
  3. OE - Output Enable Input
  4. Y0 - Output Channel 0
  5. Y1 - Output Channel 1
  6. GND - Ground
  7. Y2 - Output Channel 2
  8. Y3 - Output Channel 3
  9. VCC - Power Supply
  10. B3 - Input Channel 3
  11. B2 - Input Channel 2
  12. B1 - Input Channel 1
  13. B0 - Input Channel 0
  14. NC - No Connection

Functional Features

  • Bidirectional signal switching between four input channels and four output channels
  • Level shifting capability for interfacing different voltage domains
  • High-speed operation with minimal propagation delay
  • Low power consumption for energy-efficient applications
  • Output enable control for flexible signal routing

Advantages

  • Versatile functionality for various signal routing and level shifting applications
  • Compact package size for space-constrained designs
  • Wide supply voltage range allows compatibility with different systems
  • High-speed operation enables efficient data transmission
  • Low power consumption for energy-efficient designs

Disadvantages

  • Limited number of input and output channels (four each)
  • On-state resistance may introduce signal attenuation in certain applications
  • Propagation delay may limit performance in time-critical applications

Working Principles

The SN74CBTD3306CDRE4 is a digital multiplexer/demultiplexer integrated circuit. It allows bidirectional signal switching between four input channels and four output channels. The control inputs (A0, A1) determine the active channel, while the output enable input (OE) controls the output state.

The device operates by selectively connecting the input channels to the output channels based on the control inputs. It also provides level shifting capability, allowing signals from different voltage domains to be interfaced seamlessly.

Detailed Application Field Plans

  • Data communication systems
  • Audio/video routing and switching
  • Industrial automation
  • Test and measurement equipment
  • Battery-powered devices
  • Consumer electronics

Detailed and Complete Alternative Models

  1. SN74CBTD3306CDBQR - 16-pin SSOP package, wider operating temperature range
  2. SN74CBTD3306CPW - 14-pin TSSOP package, lower on-state resistance
  3. SN74CBTD3306DGV - 20-pin TVSOP package, higher operating frequency

These alternative models offer similar functionality but may vary in package type, temperature range, on-state resistance, or operating frequency.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74CBTD3306CDRE4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74CBTD3306CDRE4 in technical solutions:

  1. Q: What is SN74CBTD3306CDRE4? A: SN74CBTD3306CDRE4 is a high-speed, low-power digital switch designed for use in various applications, such as data communication, signal routing, and level shifting.

  2. Q: What is the maximum voltage that SN74CBTD3306CDRE4 can handle? A: SN74CBTD3306CDRE4 can handle a maximum voltage of 5.5V.

  3. Q: How many channels does SN74CBTD3306CDRE4 have? A: SN74CBTD3306CDRE4 has 6 channels, allowing it to switch or route signals between different devices or components.

  4. Q: What is the operating frequency range of SN74CBTD3306CDRE4? A: SN74CBTD3306CDRE4 can operate at frequencies up to 100 MHz, making it suitable for high-speed data transmission applications.

  5. Q: Can SN74CBTD3306CDRE4 be used for bidirectional signal routing? A: Yes, SN74CBTD3306CDRE4 supports bidirectional signal routing, allowing signals to flow in both directions.

  6. Q: Does SN74CBTD3306CDRE4 require external power supply decoupling capacitors? A: Yes, it is recommended to use external power supply decoupling capacitors to ensure stable operation of SN74CBTD3306CDRE4.

  7. Q: What is the typical propagation delay of SN74CBTD3306CDRE4? A: The typical propagation delay of SN74CBTD3306CDRE4 is around 2.5 ns, which is relatively low for high-speed applications.

  8. Q: Can SN74CBTD3306CDRE4 handle both digital and analog signals? A: SN74CBTD3306CDRE4 is primarily designed for digital signal switching and routing. While it may work with some analog signals, it is not optimized for analog applications.

  9. Q: What is the power supply voltage range for SN74CBTD3306CDRE4? A: SN74CBTD3306CDRE4 operates with a power supply voltage range of 2.3V to 3.6V.

  10. Q: Is SN74CBTD3306CDRE4 available in different package options? A: Yes, SN74CBTD3306CDRE4 is available in various package options, including SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package).

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.