Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74CBTD16211DLR
Lihat Detail Lembar Data

SN74CBTD16211DLR

Product Overview

Category

SN74CBTD16211DLR belongs to the category of digital multiplexers/demultiplexers.

Use

It is commonly used in digital systems for data routing and signal switching applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Multiple input/output configurations
  • ESD protection
  • RoHS compliant

Package

SN74CBTD16211DLR is available in a small-outline integrated circuit (SOIC) package.

Essence

The essence of SN74CBTD16211DLR lies in its ability to efficiently control the flow of digital signals within a system, enabling effective data routing and signal switching.

Packaging/Quantity

SN74CBTD16211DLR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2.3V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.5ns (typical)
  • Maximum Operating Frequency: 200MHz

Detailed Pin Configuration

SN74CBTD16211DLR consists of 56 pins, which are assigned specific functions as follows:

  1. A0
  2. B0
  3. Y0
  4. GND
  5. Y1
  6. B1
  7. A1
  8. OE#
  9. Y2
  10. B2
  11. A2
  12. VCC
  13. Y3
  14. B3
  15. A3
  16. GND
  17. Y4
  18. B4
  19. A4
  20. OE#
  21. Y5
  22. B5
  23. A5
  24. VCC
  25. Y6
  26. B6
  27. A6
  28. GND
  29. Y7
  30. B7
  31. A7
  32. OE#
  33. Y8
  34. B8
  35. A8
  36. VCC
  37. Y9
  38. B9
  39. A9
  40. GND
  41. Y10
  42. B10
  43. A10
  44. OE#
  45. Y11
  46. B11
  47. A11
  48. VCC
  49. Y12
  50. B12
  51. A12
  52. GND
  53. Y13
  54. B13
  55. A13
  56. OE#

Functional Features

  • 16-bit multiplexer/demultiplexer
  • Non-inverting outputs
  • Wide voltage range compatibility
  • Low power consumption
  • High-speed operation
  • ESD protection for robustness

Advantages and Disadvantages

Advantages

  • Versatile digital signal routing capabilities
  • Efficient data switching in digital systems
  • Wide operating voltage range allows compatibility with various devices
  • High-speed operation enables rapid signal transmission
  • ESD protection ensures reliability and durability
  • RoHS compliant, environmentally friendly

Disadvantages

  • Limited to 16-bit data routing applications
  • May require additional components for complex system designs

Working Principles

SN74CBTD16211DLR operates based on the principles of digital multiplexing and demultiplexing. It selectively routes input signals to the desired output channels using control signals. The non-inverting outputs ensure that the input signal polarity is maintained throughout the process.

Detailed Application Field Plans

SN74CBTD16211DLR finds applications in various digital systems, including but not limited to: - Data communication networks - Computer peripherals - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

  1. SN74CBTD3306CPW - 8-bit multiplexer/demultiplexer with similar characteristics
  2. SN74CBT3257DGV - 4-bit multiplexer/demultiplexer with enhanced ESD protection
  3. SN74CBTLV3125PW - 4-bit multiplexer/demultiplexer with lower power consumption

These alternative models offer different bit capacities and additional features to cater to specific system requirements.

In conclusion, SN74CBTD16211DLR is a versatile digital multiplexer/demultiplexer that provides efficient data routing and signal switching capabilities. Its high-speed operation, wide voltage range compatibility, and ESD protection make it suitable for various digital applications. However, its limited bit capacity and potential need for additional components should be considered in complex system designs.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74CBTD16211DLR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74CBTD16211DLR in technical solutions:

  1. Q: What is SN74CBTD16211DLR? A: SN74CBTD16211DLR is a high-performance, 24-bit bus switch with 5V tolerant inputs and outputs.

  2. Q: What is the purpose of SN74CBTD16211DLR? A: SN74CBTD16211DLR is used to connect or disconnect multiple devices to a common bus, enabling bidirectional data flow.

  3. Q: What voltage levels does SN74CBTD16211DLR support? A: SN74CBTD16211DLR supports both 3.3V and 5V voltage levels.

  4. Q: How many channels does SN74CBTD16211DLR have? A: SN74CBTD16211DLR has 24 channels, allowing it to handle up to 24 different signals.

  5. Q: Can SN74CBTD16211DLR be used for hot-swapping applications? A: Yes, SN74CBTD16211DLR supports hot-swapping, allowing devices to be connected or disconnected while the system is powered on.

  6. Q: What is the maximum data rate supported by SN74CBTD16211DLR? A: SN74CBTD16211DLR can support data rates up to 100 MHz.

  7. Q: Does SN74CBTD16211DLR have any built-in ESD protection? A: Yes, SN74CBTD16211DLR has built-in ESD protection, ensuring robustness against electrostatic discharge.

  8. Q: Can SN74CBTD16211DLR be used in both digital and analog applications? A: SN74CBTD16211DLR is primarily designed for digital applications, but it can also be used in certain low-frequency analog applications.

  9. Q: What is the power supply voltage range for SN74CBTD16211DLR? A: SN74CBTD16211DLR operates with a power supply voltage range of 2.3V to 3.6V.

  10. Q: Is SN74CBTD16211DLR available in different package options? A: Yes, SN74CBTD16211DLR is available in various package options, such as TSSOP and VQFN, providing flexibility for different PCB layouts.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.