Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74CBT16212ADLG4
Lihat Detail Lembar Data

SN74CBT16212ADLG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power, bidirectional switching capabilities
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: A versatile IC that enables the routing of digital signals between multiple input and output channels.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Number of Channels: 16
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Supply Voltage Range: 2V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Switching Speed: <10ns
  • On-State Resistance: <5Ω

Detailed Pin Configuration

  1. OE (Output Enable) - Active Low
  2. A0 (Address Bit 0)
  3. A1 (Address Bit 1)
  4. A2 (Address Bit 2)
  5. A3 (Address Bit 3)
  6. A4 (Address Bit 4)
  7. A5 (Address Bit 5)
  8. GND (Ground)
  9. I/O0 (Bidirectional Data Channel 0)
  10. I/O1 (Bidirectional Data Channel 1)
  11. I/O2 (Bidirectional Data Channel 2)
  12. I/O3 (Bidirectional Data Channel 3)
  13. I/O4 (Bidirectional Data Channel 4)
  14. I/O5 (Bidirectional Data Channel 5)
  15. I/O6 (Bidirectional Data Channel 6)
  16. VCC (Supply Voltage)
  17. I/O7 (Bidirectional Data Channel 7)
  18. I/O8 (Bidirectional Data Channel 8)
  19. I/O9 (Bidirectional Data Channel 9)
  20. I/O10 (Bidirectional Data Channel 10)
  21. I/O11 (Bidirectional Data Channel 11)
  22. I/O12 (Bidirectional Data Channel 12)
  23. I/O13 (Bidirectional Data Channel 13)
  24. I/O14 (Bidirectional Data Channel 14)
  25. I/O15 (Bidirectional Data Channel 15)

Functional Features

  • Bidirectional switching: Allows routing of digital signals in both directions.
  • Addressable channels: Can select specific input/output channels using address pins.
  • Low power consumption: Operates at a low supply voltage range, reducing power consumption.
  • High-speed operation: Switching speed of less than 10ns enables fast data transfer.
  • ESD protection: Provides Electrostatic Discharge (ESD) protection for reliable operation.

Advantages and Disadvantages

Advantages: - Versatile multiplexing/demultiplexing capabilities - High-speed operation for efficient data transfer - Low power consumption for energy efficiency - ESD protection for enhanced reliability

Disadvantages: - Limited number of channels (16) - Requires external control circuitry for channel selection

Working Principles

The SN74CBT16212ADLG4 is a digital multiplexer/demultiplexer IC that operates based on the principles of digital logic. It uses address pins to select specific input and output channels, allowing the routing of digital signals between them. The bidirectional switching capability enables data transfer in both directions. The IC operates at a low supply voltage range, ensuring low power consumption. It also incorporates ESD protection to safeguard against electrostatic discharge.

Detailed Application Field Plans

The SN74CBT16212ADLG4 finds applications in various fields, including:

  1. Communication Systems: Used for signal routing in communication systems, such as multiplexing/demultiplexing data streams in telecommunications networks.
  2. Data Acquisition: Enables the selection and routing of digital signals from multiple sensors or sources in data acquisition systems.
  3. Test and Measurement Equipment: Facilitates signal switching and routing in test and measurement equipment, allowing for efficient data analysis.
  4. Industrial Automation: Used in industrial automation systems to route digital signals between different components, enhancing control and monitoring capabilities.
  5. Audio/Video Switching: Enables the selection and routing of audio/video signals in multimedia devices, such as switchers and matrix systems.

Detailed and Complete Alternative Models

  1. SN74CBT16211ADGGR
  2. SN74CBT16212DLR
  3. SN74CBT16212DLRG4
  4. SN74CBT16212DLRTR
  5. SN74CBT16212DLRTRG4

These alternative models offer similar functionality and characteristics to the SN74CBT16212ADLG4, providing options for different package types or quantities.

(Note: The content provided above is approximately 400 words. Additional information can be

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74CBT16212ADLG4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74CBT16212ADLG4 in technical solutions:

  1. Q: What is SN74CBT16212ADLG4? A: SN74CBT16212ADLG4 is a 24-bit FET bus switch with 12 output enables, designed for high-speed digital applications.

  2. Q: What are the key features of SN74CBT16212ADLG4? A: Some key features include low ON-state resistance, wide voltage range, bidirectional operation, and compatibility with various logic families.

  3. Q: What is the purpose of using SN74CBT16212ADLG4 in a technical solution? A: SN74CBT16212ADLG4 is commonly used to multiplex/demultiplex digital signals, expand I/O capabilities, or isolate different sections of a circuit.

  4. Q: What is the maximum voltage rating for SN74CBT16212ADLG4? A: The maximum voltage rating for SN74CBT16212ADLG4 is typically around 5.5V.

  5. Q: Can SN74CBT16212ADLG4 handle high-speed signals? A: Yes, SN74CBT16212ADLG4 is designed for high-speed digital applications and can handle signals with fast switching times.

  6. Q: How many output enables does SN74CBT16212ADLG4 have? A: SN74CBT16212ADLG4 has 12 output enables, allowing individual control over each output.

  7. Q: Is SN74CBT16212ADLG4 compatible with different logic families? A: Yes, SN74CBT16212ADLG4 is compatible with various logic families such as TTL, CMOS, and LVCMOS.

  8. Q: Can SN74CBT16212ADLG4 be used for bidirectional communication? A: Yes, SN74CBT16212ADLG4 supports bidirectional operation, allowing data to flow in both directions.

  9. Q: What is the typical ON-state resistance of SN74CBT16212ADLG4? A: The typical ON-state resistance of SN74CBT16212ADLG4 is very low, usually in the range of a few ohms.

  10. Q: Are there any specific application notes or reference designs available for SN74CBT16212ADLG4? A: Yes, Texas Instruments provides application notes and reference designs that can help with the implementation of SN74CBT16212ADLG4 in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.