Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74CB3Q16211ZQLR
Lihat Detail Lembar Data

SN74CB3Q16211ZQLR

Product Overview

Category

SN74CB3Q16211ZQLR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and routing applications.

Characteristics

  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Compact size
  • RoHS compliant

Package

SN74CB3Q16211ZQLR is available in a small form factor package, such as a 56-ball VFBGA (Very Fine Pitch Ball Grid Array) package.

Essence

The essence of SN74CB3Q16211ZQLR lies in its ability to efficiently switch and route signals within electronic circuits, ensuring smooth data transmission.

Packaging/Quantity

SN74CB3Q16211ZQLR is typically sold in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Supply Voltage: 1.65V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Count: 16 bits
  • Switching Speed: <5ns
  • On-State Resistance: <10Ω
  • Maximum Continuous Current: 100mA

Detailed Pin Configuration

The pin configuration of SN74CB3Q16211ZQLR is as follows:

Pin 1: GND Pin 2: A1 Pin 3: B1 Pin 4: Y1 Pin 5: A2 Pin 6: B2 Pin 7: Y2 Pin 8: OE# Pin 9: GND Pin 10: A3 Pin 11: B3 Pin 12: Y3 Pin 13: A4 Pin 14: B4 Pin 15: Y4 Pin 16: VCC

Functional Features

  • Bidirectional signal switching
  • Low power consumption in both active and standby modes
  • Wide operating voltage range allows compatibility with various systems
  • High-speed operation enables efficient data transmission
  • ESD (Electrostatic Discharge) protection for enhanced reliability

Advantages and Disadvantages

Advantages

  • Compact size saves board space
  • Low power consumption prolongs battery life
  • High-speed operation ensures fast data transfer
  • RoHS compliance promotes environmental friendliness

Disadvantages

  • Limited maximum continuous current may restrict certain applications
  • Not suitable for high-power switching requirements

Working Principles

SN74CB3Q16211ZQLR operates based on CMOS (Complementary Metal-Oxide-Semiconductor) technology. It utilizes a combination of transistors and logic gates to control the flow of signals between input and output pins.

Detailed Application Field Plans

SN74CB3Q16211ZQLR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Laptops - Digital cameras - Portable gaming consoles

It is primarily used for signal routing and switching within these devices, ensuring proper data transmission between different components.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN74CB3Q16211ZQLR are: - SN74CB3Q3257ZQLR - SN74CB3Q3306ZQLR - SN74CB3Q3345ZQLR - SN74CB3Q3384ZQLR

These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable option for specific applications.

Word count: 486 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74CB3Q16211ZQLR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74CB3Q16211ZQLR in technical solutions:

  1. Question: What is SN74CB3Q16211ZQLR?
    - Answer: SN74CB3Q16211ZQLR is a high-bandwidth, low-voltage, 24-bit FET bus switch with 5V tolerant inputs and outputs.

  2. Question: What is the voltage range supported by SN74CB3Q16211ZQLR?
    - Answer: SN74CB3Q16211ZQLR supports a voltage range from 1.65V to 3.6V.

  3. Question: What is the maximum data rate supported by SN74CB3Q16211ZQLR?
    - Answer: SN74CB3Q16211ZQLR supports a maximum data rate of 400 Mbps.

  4. Question: Can SN74CB3Q16211ZQLR be used for bidirectional communication?
    - Answer: Yes, SN74CB3Q16211ZQLR can be used for bidirectional communication as it has separate input and output ports.

  5. Question: What is the typical propagation delay of SN74CB3Q16211ZQLR?
    - Answer: The typical propagation delay of SN74CB3Q16211ZQLR is around 0.7 ns.

  6. Question: Does SN74CB3Q16211ZQLR support hot swapping?
    - Answer: Yes, SN74CB3Q16211ZQLR supports hot swapping, allowing for easy replacement or insertion of devices without powering down the system.

  7. Question: Can SN74CB3Q16211ZQLR handle high-speed signals?
    - Answer: Yes, SN74CB3Q16211ZQLR is designed to handle high-speed signals and provides minimal signal distortion.

  8. Question: What is the power supply voltage required for SN74CB3Q16211ZQLR?
    - Answer: SN74CB3Q16211ZQLR requires a power supply voltage of 1.65V to 3.6V.

  9. Question: Can SN74CB3Q16211ZQLR be used in battery-powered applications?
    - Answer: Yes, SN74CB3Q16211ZQLR can be used in battery-powered applications as it operates at low voltages and has low power consumption.

  10. Question: Is SN74CB3Q16211ZQLR suitable for use in industrial environments?
    - Answer: Yes, SN74CB3Q16211ZQLR is suitable for use in industrial environments as it has a wide operating temperature range and is resistant to noise and interference.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.