Lihat spesifikasi untuk detail produk.
SN74BCT760N
Product Overview
Category
SN74BCT760N belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used in digital electronics for various applications such as data transmission, signal processing, and control systems.
Characteristics
- High-speed operation
- Low power consumption
- Wide operating voltage range
- Compatibility with TTL logic levels
- Robustness against noise and interference
Package
SN74BCT760N is available in a 20-pin plastic dual in-line package (PDIP).
Essence
The essence of SN74BCT760N lies in its ability to process and manipulate digital signals efficiently and reliably.
Packaging/Quantity
SN74BCT760N is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer and supplier.
Specifications
- Supply Voltage: 4.5V to 5.5V
- Logic Family: BCT
- Number of Pins: 20
- Operating Temperature Range: -40°C to +85°C
- Input/Output Type: Tri-state
Detailed Pin Configuration
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- GND
- B0
- B1
- B2
- B3
- B4
- B5
- B6
- B7
- OE
- VCC
- Y
Functional Features
- Octal bus transceiver with tri-state outputs
- Bidirectional data flow between A and B buses
- Output enable (OE) input for controlling the bus output state
- TTL-compatible inputs and outputs
Advantages and Disadvantages
Advantages
- High-speed data transmission
- Low power consumption
- Wide operating voltage range allows for flexibility in different applications
- Robustness against noise and interference ensures reliable signal processing
Disadvantages
- Limited number of input/output pins (8-bit)
- May require additional external components for specific applications
Working Principles
SN74BCT760N operates based on the principles of digital logic. It uses a combination of transistors, resistors, and other electronic components to process and manipulate binary signals. The IC's internal circuitry enables bidirectional data flow between the A and B buses, controlled by the OE input.
Detailed Application Field Plans
SN74BCT760N finds applications in various fields, including: 1. Data communication systems 2. Microprocessor interfacing 3. Industrial control systems 4. Automotive electronics 5. Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to SN74BCT760N are: 1. SN74LS245N 2. SN74HC245N 3. CD74HCT245E 4. MC74ACT245DW 5. 74FCT245ATQ
These alternative models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 410 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74BCT760N dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of SN74BCT760N in technical solutions:
Q: What is SN74BCT760N? A: SN74BCT760N is a type of integrated circuit (IC) commonly used as a bus transceiver in digital systems.
Q: What is the purpose of SN74BCT760N? A: SN74BCT760N is designed to enable bidirectional data transfer between two buses with different voltage levels or logic families.
Q: What voltage levels does SN74BCT760N support? A: SN74BCT760N supports TTL (Transistor-Transistor Logic) voltage levels, typically 5V.
Q: Can SN74BCT760N be used with CMOS (Complementary Metal-Oxide-Semiconductor) devices? A: Yes, SN74BCT760N can be used with CMOS devices as it has built-in level-shifting capabilities.
Q: How many channels does SN74BCT760N have? A: SN74BCT760N has 8 bidirectional channels, allowing for simultaneous data transfer in both directions.
Q: What is the maximum data rate supported by SN74BCT760N? A: SN74BCT760N can handle data rates up to 25 MHz, making it suitable for various high-speed applications.
Q: Does SN74BCT760N have any built-in protection features? A: Yes, SN74BCT760N includes input/output diodes that provide protection against electrostatic discharge (ESD).
Q: Can SN74BCT760N be used in automotive applications? A: Yes, SN74BCT760N is designed to meet automotive industry standards and can be used in automotive applications.
Q: What is the power supply voltage range for SN74BCT760N? A: SN74BCT760N operates with a power supply voltage range of 4.5V to 5.5V.
Q: Are there any specific layout considerations when using SN74BCT760N? A: Yes, it is recommended to follow the manufacturer's guidelines for proper decoupling, signal integrity, and thermal management during PCB layout.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the datasheet and consult with technical experts for accurate information.