Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74BCT652NT
Lihat Detail Lembar Data

SN74BCT652NT

Product Overview

Category

SN74BCT652NT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for data bus transceivers and registers in various digital systems.

Characteristics

  • High-speed, low-power CMOS technology
  • 8-bit wide bidirectional bus interface
  • Non-inverting outputs
  • 3-state outputs for bus-oriented applications
  • Schmitt-trigger inputs for noise immunity
  • Available in a 24-pin package

Package and Quantity

SN74BCT652NT is available in a 24-pin dual in-line package (DIP). It is typically sold in quantities of one unit per package.

Specifications

  • Supply voltage: 4.5V to 5.5V
  • Input voltage range: 0V to VCC
  • Output voltage range: 0V to VCC
  • Operating temperature range: -40°C to +85°C
  • Maximum propagation delay: 10ns
  • Maximum quiescent current: 2mA

Pin Configuration

The detailed pin configuration of SN74BCT652NT is as follows:

  1. A0 - Data bus input/output A0
  2. A1 - Data bus input/output A1
  3. A2 - Data bus input/output A2
  4. A3 - Data bus input/output A3
  5. A4 - Data bus input/output A4
  6. A5 - Data bus input/output A5
  7. A6 - Data bus input/output A6
  8. A7 - Data bus input/output A7
  9. GND - Ground
  10. OE - Output enable
  11. DIR - Direction control
  12. B7 - Data bus input/output B7
  13. B6 - Data bus input/output B6
  14. B5 - Data bus input/output B5
  15. B4 - Data bus input/output B4
  16. B3 - Data bus input/output B3
  17. B2 - Data bus input/output B2
  18. B1 - Data bus input/output B1
  19. B0 - Data bus input/output B0
  20. VCC - Supply voltage
  21. NC - No connection
  22. NC - No connection
  23. NC - No connection
  24. NC - No connection

Functional Features

  • Bidirectional data transfer between two independent buses
  • Direction control for selecting the data flow direction
  • Output enable control for enabling/disabling the outputs
  • Non-inverting outputs for maintaining signal integrity
  • Schmitt-trigger inputs for improved noise immunity

Advantages and Disadvantages

Advantages

  • High-speed operation
  • Low power consumption
  • Noise-immune inputs
  • 3-state outputs for bus-oriented applications

Disadvantages

  • Limited number of data bus lines (8-bit)

Working Principles

SN74BCT652NT is designed to facilitate bidirectional data transfer between two independent buses. The direction control pin (DIR) determines the data flow direction, while the output enable pin (OE) enables or disables the outputs. The non-inverting outputs ensure that the transmitted signals maintain their original polarity. The Schmitt-trigger inputs provide increased noise immunity, allowing reliable data transmission in noisy environments.

Detailed Application Field Plans

SN74BCT652NT finds applications in various digital systems, including but not limited to: - Microcontrollers - Data communication systems - Industrial automation - Embedded systems - Networking equipment

Alternative Models

Below are some alternative models that can be used as substitutes for SN74BCT652NT: - SN74ACT652 - SN74HC652 - SN74LS652 - SN74LV652

These models offer similar functionality and can be used interchangeably depending on the specific requirements of the application.

In conclusion, SN74BCT652NT is a versatile integrated circuit commonly used for data bus transceivers and registers in digital systems. Its high-speed operation, low power consumption, and noise immunity make it suitable for various applications in different industries.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74BCT652NT dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74BCT652NT in technical solutions:

  1. Q: What is SN74BCT652NT? A: SN74BCT652NT is a type of integrated circuit (IC) commonly used as a bus transceiver and register in digital systems.

  2. Q: What are the key features of SN74BCT652NT? A: Some key features include 8-bit bidirectional transceivers, 3-state outputs, and compatibility with TTL logic levels.

  3. Q: How can SN74BCT652NT be used in technical solutions? A: It can be used for data transfer between two buses or systems with different voltage levels, acting as a buffer or level shifter.

  4. Q: What is the maximum operating voltage for SN74BCT652NT? A: The maximum operating voltage is typically 5.5V, making it suitable for many digital systems.

  5. Q: Can SN74BCT652NT handle high-speed data transfer? A: Yes, it has a fast propagation delay and can handle high-speed data transfer up to certain frequencies, typically in the MHz range.

  6. Q: Does SN74BCT652NT support bidirectional communication? A: Yes, it supports bidirectional data transfer, allowing data to flow in both directions between the two buses.

  7. Q: Are there any special considerations when using SN74BCT652NT? A: It is important to ensure proper power supply decoupling and signal integrity measures to minimize noise and maintain reliable operation.

  8. Q: Can SN74BCT652NT be cascaded or used in parallel to increase the number of transceivers? A: Yes, multiple SN74BCT652NT ICs can be cascaded or used in parallel to increase the number of bidirectional transceivers in a system.

  9. Q: What is the typical power consumption of SN74BCT652NT? A: The power consumption depends on various factors, but it is generally low due to its CMOS technology.

  10. Q: Where can I find more information about using SN74BCT652NT in technical solutions? A: You can refer to the datasheet provided by the manufacturer, which contains detailed information about the IC's specifications and application guidelines.

Please note that the answers provided here are general and may vary depending on specific use cases and requirements. It is always recommended to consult the datasheet and relevant technical documentation for accurate information.