Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74BCT623N
Lihat Detail Lembar Data

SN74BCT623N

Product Overview

Category

SN74BCT623N belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a bus transceiver in digital systems.

Characteristics

  • High-speed, non-inverting bus transceiver
  • Compatible with TTL and CMOS logic levels
  • 3-state outputs for bus-oriented applications
  • Wide operating voltage range: 4.5V to 5.5V
  • Low power consumption
  • Schmitt-trigger inputs for noise immunity

Package

SN74BCT623N is available in a 20-pin DIP (Dual Inline Package) format.

Essence

The essence of SN74BCT623N lies in its ability to facilitate bidirectional data transfer between two buses with different voltage levels.

Packaging/Quantity

SN74BCT623N is typically packaged in tubes or reels, with quantities varying depending on the supplier.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay Time: 10ns
  • Maximum Operating Frequency: 100MHz

Detailed Pin Configuration

  1. A1: Data Input/Output A
  2. B1: Data Input/Output B
  3. GND: Ground
  4. A2: Data Input/Output A
  5. B2: Data Input/Output B
  6. OE: Output Enable
  7. DIR: Direction Control
  8. VCC: Power Supply
  9. B3: Data Input/Output B
  10. A3: Data Input/Output A
  11. B4: Data Input/Output B
  12. A4: Data Input/Output A
  13. B5: Data Input/Output B
  14. A5: Data Input/Output A
  15. B6: Data Input/Output B
  16. A6: Data Input/Output A
  17. B7: Data Input/Output B
  18. A7: Data Input/Output A
  19. B8: Data Input/Output B
  20. A8: Data Input/Output A

Functional Features

  • Bidirectional data transfer between two buses with different voltage levels
  • Non-inverting logic for compatibility with TTL and CMOS levels
  • 3-state outputs allow multiple devices to share a common bus
  • Schmitt-trigger inputs provide noise immunity

Advantages

  • High-speed operation enables efficient data transfer
  • Wide operating voltage range allows compatibility with various systems
  • Low power consumption reduces energy requirements
  • Schmitt-trigger inputs enhance noise immunity, ensuring reliable operation

Disadvantages

  • Limited number of data input/output pins (8 pairs)
  • Not suitable for applications requiring a large number of simultaneous bidirectional data transfers

Working Principles

SN74BCT623N operates by receiving data from one bus and transmitting it to another bus bidirectionally. The direction of data flow is controlled by the DIR pin. When the DIR pin is set to a specific logic level, the data is transferred in the corresponding direction. The OE pin enables or disables the outputs, allowing multiple devices to share the same bus without interference.

Detailed Application Field Plans

SN74BCT623N finds applications in various digital systems, including but not limited to: - Microcontrollers - Data communication systems - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  1. SN74BCT623NT: Surface Mount Package, Tape and Reel Packaging
  2. SN74BCT623NSR: Surface Mount Package, 20-pin SOP (Small Outline Package)
  3. SN74BCT623DW: Wide Supply Voltage Range (2V to 6V), 20-pin SOIC (Small Outline Integrated Circuit) Package

These alternative models offer similar functionality and can be used as substitutes for SN74BCT623N in various applications.

Word count: 515 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74BCT623N dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74BCT623N in technical solutions:

  1. Q: What is SN74BCT623N? A: SN74BCT623N is a type of integrated circuit (IC) commonly used as an octal bus transceiver.

  2. Q: What is the purpose of SN74BCT623N? A: SN74BCT623N is designed to facilitate bidirectional data transfer between two buses with different voltage levels.

  3. Q: What voltage levels does SN74BCT623N support? A: SN74BCT623N supports TTL (Transistor-Transistor Logic) voltage levels, typically 5V.

  4. Q: How many bits can SN74BCT623N handle? A: SN74BCT623N is an octal (8-bit) bus transceiver, meaning it can handle 8 bits of data simultaneously.

  5. Q: Can SN74BCT623N be used for level shifting? A: Yes, SN74BCT623N can be used for level shifting between different voltage domains.

  6. Q: What is the maximum operating frequency of SN74BCT623N? A: The maximum operating frequency of SN74BCT623N is typically around 40 MHz.

  7. Q: Does SN74BCT623N have any built-in protection features? A: Yes, SN74BCT623N has built-in input/output diodes that provide protection against electrostatic discharge (ESD).

  8. Q: Can SN74BCT623N be used in both parallel and serial communication systems? A: Yes, SN74BCT623N can be used in both parallel and serial communication systems, depending on the application.

  9. Q: What is the power supply voltage range for SN74BCT623N? A: The power supply voltage range for SN74BCT623N is typically between 4.5V and 5.5V.

  10. Q: Are there any specific precautions to consider when using SN74BCT623N? A: It is important to ensure that the input and output voltage levels are within the specified limits to prevent damage to the IC. Additionally, proper decoupling capacitors should be used to stabilize the power supply.