Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74ALVC245PW
Lihat Detail Lembar Data

SN74ALVC245PW

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Bus Transceiver
  • Characteristics:
    • High-speed CMOS technology
    • Low power consumption
    • Wide voltage range compatibility
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Bi-directional level shifting and bus transceiver functionality
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Input Capacitance: 4pF
  • Output Capacitance: 8pF
  • Propagation Delay: 2.5ns (max)
  • Output Drive Capability: ±24mA

Detailed Pin Configuration

The SN74ALVC245PW has a total of 20 pins arranged as follows:

___________ A1 |1 20| VCC A2 |2 19| B1 A3 |3 18| B2 A4 |4 17| B3 A5 |5 SN74 16| B4 A6 |6 ALVC 15| B5 A7 |7 245P 14| B6 A8 |8 W 13| B7 GND |9 12| B8 OE |10 11| DIR ‾‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Bi-directional level shifting between two voltage domains
  • Bus transceiver functionality for bidirectional data transfer
  • Automatic direction control based on DIR pin input
  • Output enable (OE) pin for disabling the outputs

Advantages and Disadvantages

Advantages

  • High-speed operation suitable for fast data transfer
  • Low power consumption, ideal for battery-powered devices
  • Wide voltage range compatibility allows interfacing with various systems
  • Small package size saves board space

Disadvantages

  • Limited output drive capability compared to some other ICs
  • Not suitable for high-voltage applications (>3.6V)

Working Principles

The SN74ALVC245PW is designed using high-speed CMOS technology, allowing it to operate at fast speeds while consuming low power. It acts as a bi-directional level shifter and bus transceiver, enabling communication between two voltage domains.

The direction of data flow is controlled by the DIR pin. When DIR is set to logic high, data flows from the A side to the B side, and when DIR is set to logic low, data flows from the B side to the A side. The OE pin can be used to disable the outputs, effectively tri-stating them.

Detailed Application Field Plans

The SN74ALVC245PW is commonly used in various applications that require level shifting and bidirectional data transfer. Some typical application fields include: - Communication interfaces (e.g., UART, SPI, I2C) - Microcontroller and FPGA interfacing - Data acquisition systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

  • SN74LVC245A: Similar functionality with lower voltage range (1.65V to 3.6V)
  • SN74LVCH245A: Similar functionality with higher voltage range (1.2V to 3.6V)
  • SN74AHC245: Similar functionality with higher voltage range (2V to 5.5V)

These alternative models offer similar level shifting and bus transceiver capabilities, but with different voltage range compatibility.

In conclusion, the SN74ALVC245PW is a versatile IC that provides bi-directional level shifting and bus transceiver functionality. Its high-speed operation, low power consumption, and wide voltage range compatibility make it suitable for various applications in different industries.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74ALVC245PW dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74ALVC245PW:

  1. Q: What is SN74ALVC245PW? A: SN74ALVC245PW is a bidirectional octal bus transceiver with 3-state outputs, commonly used for level shifting and voltage translation in digital systems.

  2. Q: What is the operating voltage range of SN74ALVC245PW? A: The operating voltage range of SN74ALVC245PW is typically between 1.65V and 3.6V.

  3. Q: How many bidirectional channels does SN74ALVC245PW have? A: SN74ALVC245PW has 8 bidirectional channels, allowing for the transmission of data in both directions.

  4. Q: Can SN74ALVC245PW handle high-speed data transfer? A: Yes, SN74ALVC245PW is designed to support high-speed data transfer rates up to 400 Mbps.

  5. Q: What is the maximum output current that SN74ALVC245PW can drive? A: SN74ALVC245PW can drive up to 24 mA of output current per channel.

  6. Q: Is SN74ALVC245PW compatible with different logic families? A: Yes, SN74ALVC245PW is compatible with various logic families, including TTL, CMOS, and LVCMOS.

  7. Q: Can SN74ALVC245PW be used for level shifting between different voltage domains? A: Yes, SN74ALVC245PW is commonly used for level shifting between voltage domains, such as between 3.3V and 5V systems.

  8. Q: Does SN74ALVC245PW have built-in ESD protection? A: Yes, SN74ALVC245PW has built-in ESD protection, which helps to safeguard against electrostatic discharge events.

  9. Q: Can SN74ALVC245PW be used in both parallel and serial communication systems? A: Yes, SN74ALVC245PW can be used in both parallel and serial communication systems, depending on the application requirements.

  10. Q: What is the package type of SN74ALVC245PW? A: SN74ALVC245PW is available in a TSSOP (Thin Shrink Small Outline Package) package, which is commonly used for surface-mount applications.

Please note that these answers are general and may vary based on specific datasheet specifications and application requirements.