Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74AHC374PWR

SN74AHC374PWR

Product Overview

Category

SN74AHC374PWR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal storage and manipulation in digital systems.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

SN74AHC374PWR is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of SN74AHC374PWR lies in its ability to store and manipulate digital signals efficiently.

Packaging/Quantity

This IC is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage: 2V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Number of Flip-Flops: 8
  • Logic Family: AHC

Detailed Pin Configuration

SN74AHC374PWR consists of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. CP (Clock Pulse)
  12. MR (Master Reset)
  13. Q0 (Flip-Flop Output 0)
  14. Q1 (Flip-Flop Output 1)
  15. Q2 (Flip-Flop Output 2)
  16. Q3 (Flip-Flop Output 3)
  17. Q4 (Flip-Flop Output 4)
  18. Q5 (Flip-Flop Output 5)
  19. Q6 (Flip-Flop Output 6)
  20. VCC (Supply Voltage)

Functional Features

  • Data storage: SN74AHC374PWR can store digital data in its eight flip-flops.
  • Data manipulation: It allows for the manipulation of stored data through clock pulses and control signals.
  • Output enable: The output enable pin enables or disables the outputs, providing flexibility in signal routing.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide operating voltage range ensures compatibility with various systems.
  • Compatibility with different logic families simplifies integration into existing designs.

Disadvantages

  • Limited number of flip-flops may restrict the complexity of applications.
  • Lack of built-in error detection or correction mechanisms.

Working Principles

SN74AHC374PWR operates based on the principles of sequential logic. It stores data in its flip-flops and processes it according to clock pulses and control signals. The output enable pin controls the flow of data from the flip-flops to the output pins.

Detailed Application Field Plans

SN74AHC374PWR finds applications in various digital systems, including but not limited to: - Microcontrollers - Data storage devices - Communication systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74AHC374PWR are: - 74HC374 - CD74HC374 - MC74HC374 - 74HCT374

These models belong to the same logic family and provide comparable features and performance.

Word count: 436 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74AHC374PWR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74AHC374PWR in technical solutions:

  1. Question: What is the SN74AHC374PWR?
    Answer: The SN74AHC374PWR is a high-speed octal D-type flip-flop with 3-state outputs, commonly used in digital logic applications.

  2. Question: What is the operating voltage range of SN74AHC374PWR?
    Answer: The operating voltage range of SN74AHC374PWR is from 2 V to 5.5 V.

  3. Question: What is the maximum clock frequency supported by SN74AHC374PWR?
    Answer: The maximum clock frequency supported by SN74AHC374PWR is typically around 100 MHz.

  4. Question: How many flip-flops are there in SN74AHC374PWR?
    Answer: SN74AHC374PWR has 8 flip-flops, making it an octal (8-bit) flip-flop.

  5. Question: Can SN74AHC374PWR be used for level shifting?
    Answer: Yes, SN74AHC374PWR can be used for level shifting as it supports both 3.3V and 5V logic levels.

  6. Question: What is the output drive capability of SN74AHC374PWR?
    Answer: SN74AHC374PWR has a typical output drive capability of ±24 mA.

  7. Question: Does SN74AHC374PWR have internal pull-up or pull-down resistors?
    Answer: No, SN74AHC374PWR does not have internal pull-up or pull-down resistors. External resistors may be required if needed.

  8. Question: Can SN74AHC374PWR be used in bus-oriented applications?
    Answer: Yes, SN74AHC374PWR is commonly used in bus-oriented applications due to its 3-state outputs.

  9. Question: What is the power supply current consumption of SN74AHC374PWR?
    Answer: The power supply current consumption of SN74AHC374PWR depends on the operating conditions and load, typically ranging from a few milliamperes to tens of milliamperes.

  10. Question: Is SN74AHC374PWR suitable for high-speed data transfer applications?
    Answer: Yes, SN74AHC374PWR is designed for high-speed operation and can be used in various high-speed data transfer applications.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.