Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74ACT240N
Lihat Detail Lembar Data

SN74ACT240N

Product Overview

Category

SN74ACT240N belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a buffer or line driver in various electronic applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • 3-state outputs for bus-oriented applications

Package

SN74ACT240N is available in a 20-pin plastic dual in-line package (PDIP).

Essence

The essence of SN74ACT240N lies in its ability to provide buffering and driving capabilities, ensuring reliable signal transmission in electronic circuits.

Packaging/Quantity

SN74ACT240N is typically packaged in tubes or reels, with each containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 10ns
  • Maximum Output Current: ±24mA

Detailed Pin Configuration

  1. A1
  2. B1
  3. Y1
  4. A2
  5. B2
  6. Y2
  7. GND
  8. Y3
  9. B3
  10. A3
  11. Y4
  12. B4
  13. A4
  14. VCC
  15. OE
  16. Y5
  17. B5
  18. A5
  19. Y6
  20. B6

Functional Features

  • Buffering: SN74ACT240N acts as a buffer, amplifying and stabilizing input signals before transmitting them to the output.
  • Line Driving: It can drive signals over long distances without significant degradation, making it suitable for bus-oriented applications.
  • 3-State Outputs: The 3-state outputs allow multiple devices to share a common bus, enabling efficient communication in complex systems.

Advantages and Disadvantages

Advantages

  • High-speed operation ensures quick signal transmission.
  • Low power consumption minimizes energy usage.
  • Wide operating voltage range provides flexibility in various applications.
  • Schmitt-trigger inputs enhance noise immunity, improving signal integrity.

Disadvantages

  • Limited output current may restrict its use in high-power applications.
  • The 20-pin package may require additional space on the circuit board compared to smaller packages.

Working Principles

SN74ACT240N operates based on the principles of digital logic. It receives input signals, buffers them using internal circuitry, and drives the amplified signals to the output pins. The 3-state outputs allow the IC to control the flow of signals on the bus, preventing conflicts between multiple devices connected to the same bus.

Detailed Application Field Plans

SN74ACT240N finds applications in various fields, including: 1. Microcontroller-based systems 2. Data communication networks 3. Industrial automation 4. Automotive electronics 5. Consumer electronics

In microcontroller-based systems, SN74ACT240N can be used to interface with external devices, ensuring reliable signal transmission. In data communication networks, it helps in driving signals across long distances without loss or distortion. In industrial automation and automotive electronics, it plays a vital role in controlling and monitoring various components. In consumer electronics, it is utilized for signal buffering and line driving in audio/video equipment, gaming consoles, and more.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74ACT240N are: 1. SN74ACT244N 2. SN74HCT240N 3. SN74LS240N 4. SN74HC240N

These alternative models can be considered based on specific requirements, availability, and compatibility with the existing circuit design.

Word count: 524 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74ACT240N dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74ACT240N in technical solutions:

  1. Q: What is SN74ACT240N? A: SN74ACT240N is a type of octal buffer and line driver integrated circuit (IC) that can be used for various digital logic applications.

  2. Q: What is the purpose of SN74ACT240N? A: SN74ACT240N is designed to provide buffering and driving capabilities for digital signals, allowing them to be transmitted over longer distances or connected to multiple devices.

  3. Q: What voltage levels does SN74ACT240N support? A: SN74ACT240N supports TTL-compatible input and output voltage levels, typically operating at 5V.

  4. Q: How many channels does SN74ACT240N have? A: SN74ACT240N has 8 channels, making it suitable for applications that require multiple signal lines.

  5. Q: Can SN74ACT240N handle bidirectional communication? A: Yes, SN74ACT240N supports bidirectional communication, allowing data to be transmitted in both directions on each channel.

  6. Q: What is the maximum current that SN74ACT240N can source or sink? A: SN74ACT240N can source or sink up to 24mA of current per channel, making it suitable for driving various loads.

  7. Q: Does SN74ACT240N have any built-in protection features? A: Yes, SN74ACT240N includes built-in ESD protection diodes to safeguard against electrostatic discharge events.

  8. Q: Can SN74ACT240N operate at high speeds? A: Yes, SN74ACT240N is designed to operate at high-speeds, with typical propagation delays in the nanosecond range.

  9. Q: Can SN74ACT240N be cascaded with other ICs? A: Yes, SN74ACT240N can be easily cascaded with other similar ICs to expand the number of channels or drive larger loads.

  10. Q: What are some common applications of SN74ACT240N? A: SN74ACT240N is commonly used in digital systems, such as data buses, memory interfaces, address decoding, and general-purpose signal buffering.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.