Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74ABT373DWR
Lihat Detail Lembar Data

SN74ABT373DWR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Octal Transparent D-Type Latches with 3-State Outputs
  • Characteristics:
    • High-speed operation
    • 3-state outputs for bus-oriented applications
    • Non-inverting outputs
    • Output sink capability of 64 mA, source capability of 32 mA
    • Power-up 3-state
    • Latch-up performance exceeds 500 mA per JESD 17
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The SN74ABT373DWR is an octal transparent latch designed for high-speed bus-oriented applications.
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply voltage range: 4.5V to 5.5V
  • Input voltage range: 0V to VCC
  • Operating temperature range: -40°C to +85°C
  • Output current: ±64mA
  • Propagation delay time: 2.8ns (typical)
  • Output capacitance: 6pF (typical)

Detailed Pin Configuration

The SN74ABT373DWR has a total of 20 pins. The pin configuration is as follows:

  1. OE (Output Enable) - Active Low
  2. LE (Latch Enable) - Active High
  3. D0 (Data Input 0)
  4. D1 (Data Input 1)
  5. D2 (Data Input 2)
  6. D3 (Data Input 3)
  7. D4 (Data Input 4)
  8. D5 (Data Input 5)
  9. D6 (Data Input 6)
  10. D7 (Data Input 7)
  11. GND (Ground)
  12. Q0 (Output 0)
  13. Q1 (Output 1)
  14. Q2 (Output 2)
  15. Q3 (Output 3)
  16. Q4 (Output 4)
  17. Q5 (Output 5)
  18. Q6 (Output 6)
  19. Q7 (Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • The SN74ABT373DWR is an octal transparent latch with 3-state outputs.
  • It allows data to be latched and stored when the latch enable (LE) input is high.
  • The output enable (OE) input controls the 3-state outputs, allowing them to be in a high-impedance state when disabled.
  • The non-inverting outputs provide a true representation of the stored data.

Advantages and Disadvantages

Advantages: - High-speed operation suitable for bus-oriented applications - Non-inverting outputs provide accurate data representation - Power-up 3-state feature ensures controlled output during power-up - Latch-up performance exceeds industry standards

Disadvantages: - Limited supply voltage range (4.5V to 5.5V) - Output current limitations may restrict certain applications

Working Principles

The SN74ABT373DWR operates by using the latch enable (LE) input to control the storage of data. When LE is high, the inputs (D0-D7) are latched and stored in the internal flip-flops. The stored data can then be accessed through the outputs (Q0-Q7). The output enable (OE) input determines whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

The SN74ABT373DWR is commonly used in various applications, including:

  1. Data storage and retrieval systems
  2. Bus-oriented architectures
  3. Memory interfacing
  4. Address decoding
  5. Data buffering

Detailed and Complete Alternative Models

  1. SN74ABT373DBR - SOIC package, 2500 pieces per reel
  2. SN74ABT373PW - TSSOP (Thin Shrink Small Outline Package), 2000 pieces per reel
  3. SN74ABT373D - PDIP (Plastic Dual-In-Line Package), tube packaging

These alternative models offer similar functionality to the SN74ABT373DWR but may have different package options or quantities per reel.

Word count: 474 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74ABT373DWR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74ABT373DWR:

  1. Question: What is the function of SN74ABT373DWR?
    Answer: SN74ABT373DWR is an octal transparent latch with 3-state outputs. It can store data and provide output based on control signals.

  2. Question: What is the operating voltage range for SN74ABT373DWR?
    Answer: The operating voltage range for SN74ABT373DWR is typically between 4.5V and 5.5V.

  3. Question: How many bits can SN74ABT373DWR store?
    Answer: SN74ABT373DWR can store 8 bits of data, as it is an octal latch.

  4. Question: Can SN74ABT373DWR be used in both parallel and serial data transfer applications?
    Answer: Yes, SN74ABT373DWR can be used in both parallel and serial data transfer applications, depending on the configuration and control signals.

  5. Question: What is the maximum frequency at which SN74ABT373DWR can operate?
    Answer: SN74ABT373DWR can typically operate at a maximum frequency of 125 MHz.

  6. Question: Does SN74ABT373DWR have any built-in protection features?
    Answer: Yes, SN74ABT373DWR has built-in ESD (Electrostatic Discharge) protection features to prevent damage from static electricity.

  7. Question: Can SN74ABT373DWR drive LEDs or other low-power devices directly?
    Answer: Yes, SN74ABT373DWR can drive LEDs or other low-power devices directly, as long as the current requirements are within its specified limits.

  8. Question: What is the power consumption of SN74ABT373DWR?
    Answer: The power consumption of SN74ABT373DWR depends on various factors such as operating frequency, voltage, and load conditions. Please refer to the datasheet for detailed information.

  9. Question: Can SN74ABT373DWR be cascaded to increase the number of bits stored?
    Answer: Yes, multiple SN74ABT373DWR latches can be cascaded together to increase the number of bits stored.

  10. Question: Are there any specific layout considerations for using SN74ABT373DWR?
    Answer: Yes, it is recommended to follow proper PCB layout guidelines, such as minimizing trace lengths, providing decoupling capacitors, and ensuring signal integrity, to achieve optimal performance with SN74ABT373DWR.

Please note that these answers are general and may vary based on specific application requirements. It is always recommended to refer to the datasheet and consult the manufacturer for accurate and detailed information.