Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74ABT126D
Lihat Detail Lembar Data

SN74ABT126D

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Driver
  • Characteristics: High-speed, low-power, non-inverting
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Quad buffer/driver with 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Drive Capability: ±24mA at 3.3V
  • Propagation Delay Time: 2.8ns (typical)

Detailed Pin Configuration

The SN74ABT126D has a 14-pin SOIC package with the following pin configuration:

  1. 1A (Input 1)
  2. 1Y (Output 1)
  3. GND (Ground)
  4. 2A (Input 2)
  5. 2Y (Output 2)
  6. 3A (Input 3)
  7. 3Y (Output 3)
  8. 4A (Input 4)
  9. 4Y (Output 4)
  10. OE (Output Enable)
  11. NC (No Connection)
  12. VCC (Supply Voltage)
  13. NC (No Connection)
  14. GND (Ground)

Functional Features

  • Quad non-inverting buffer/driver
  • 3-state outputs for bus-oriented applications
  • High-speed operation with minimal power consumption
  • Compatible with TTL (Transistor-Transistor Logic) input/output levels
  • Balanced propagation delays for all inputs and outputs

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer - Low-power consumption helps in reducing overall energy usage - 3-state outputs enable bus sharing and reduce contention issues

Disadvantages: - Limited voltage range (4.5V to 5.5V) may not be suitable for all applications - SOIC package may require additional precautions during assembly

Working Principles

The SN74ABT126D is a buffer/driver IC that amplifies and controls the signals received at its inputs. It operates by using internal circuitry to amplify the input signals and provide corresponding output signals. The 3-state outputs allow the device to be effectively disconnected from the bus when not in use, preventing signal interference.

Detailed Application Field Plans

The SN74ABT126D is commonly used in various applications, including:

  1. Data communication systems
  2. Computer peripherals
  3. Industrial automation
  4. Automotive electronics
  5. Consumer electronics

In data communication systems, the SN74ABT126D can be used to buffer and drive signals between different components, ensuring reliable data transmission. In computer peripherals, it can be employed to interface between microcontrollers and peripheral devices such as displays or sensors. In industrial automation and automotive electronics, it aids in controlling and amplifying signals for various control systems. Lastly, in consumer electronics, it finds application in devices like televisions, audio systems, and gaming consoles.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SN74ABT126D are:

  1. SN74ABT125D: Quad non-inverting buffer/driver with 3-state outputs
  2. SN74ABT2244A: Octal buffer/line driver with 3-state outputs
  3. SN74ABT16245A: 16-bit bus transceiver with 3-state outputs
  4. SN74ABT541A: Octal buffer/line driver with 3-state outputs and series damping resistors

These alternative models can be considered based on specific requirements, such as the number of inputs/outputs or additional features like damping resistors.

In conclusion, the SN74ABT126D is a high-speed, low-power buffer/driver IC that finds application in various fields. Its quad non-inverting design, 3-state outputs, and compatibility with TTL levels make it a versatile choice for signal amplification and control.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74ABT126D dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74ABT126D:

  1. Question: What is SN74ABT126D?
    Answer: SN74ABT126D is a quad buffer/line driver with 3-state outputs, commonly used in digital logic applications.

  2. Question: What is the operating voltage range for SN74ABT126D?
    Answer: The operating voltage range for SN74ABT126D is typically between 4.5V and 5.5V.

  3. Question: What is the maximum output current that SN74ABT126D can drive?
    Answer: SN74ABT126D can drive up to 32mA of output current per channel.

  4. Question: Can SN74ABT126D be used as a level shifter?
    Answer: Yes, SN74ABT126D can be used as a level shifter to convert signals between different voltage levels.

  5. Question: How many channels does SN74ABT126D have?
    Answer: SN74ABT126D has four independent channels, each with a separate input and output.

  6. Question: What is the propagation delay of SN74ABT126D?
    Answer: The typical propagation delay of SN74ABT126D is around 3.8ns.

  7. Question: Can SN74ABT126D be used in high-speed applications?
    Answer: Yes, SN74ABT126D is designed for high-speed operation and can be used in applications with fast switching requirements.

  8. Question: Does SN74ABT126D have built-in protection features?
    Answer: Yes, SN74ABT126D has built-in ESD (electrostatic discharge) protection on all inputs and outputs.

  9. Question: Can SN74ABT126D be used in both input and output buffer applications?
    Answer: Yes, SN74ABT126D can be used as both an input buffer and an output buffer depending on the application requirements.

  10. Question: Is SN74ABT126D compatible with other logic families?
    Answer: Yes, SN74ABT126D is compatible with a wide range of logic families, including TTL, CMOS, and LVTTL.

Please note that these answers are general and may vary based on specific application requirements and datasheet specifications.