SN7497NG4

Product Overview

Category: Integrated Circuit
Use: Counter/Divider
Characteristics: High-speed, low-power TTL-compatible device
Package: DIP (Dual In-line Package)
Essence: Sequential counter with asynchronous clear
Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

Supply Voltage Range: 4.75V to 5.25V
Input Voltage Range: 0V to VCC
Operating Temperature Range: -40°C to +85°C
Maximum Clock Frequency: 30MHz
Maximum Counting Frequency: 15MHz

Detailed Pin Configuration

The SN7497NG4 has a total of 14 pins, which are assigned as follows:

CLR (Clear) - Asynchronous clear input
CLK (Clock) - Clock input
A - Data input A
B - Data input B
C - Data input C
D - Data input D
E - Data input E
F - Data input F
GND (Ground) - Ground reference
QD - Output QD
QC - Output QC
QB - Output QB
QA - Output QA
VCC - Positive power supply

Functional Features

The SN7497NG4 is a 6-bit sequential counter with an asynchronous clear function.
It can be used as a frequency divider or a binary counter.
The counter advances on the rising edge of the clock signal.
The asynchronous clear input allows for immediate resetting of the counter to zero.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - TTL-compatible inputs and outputs - Wide operating temperature range

Disadvantages: - Limited maximum clock and counting frequencies - Limited number of data inputs

Working Principles

The SN7497NG4 operates based on the principle of sequential counting. It counts from 0 to 63 (in binary) and then wraps around back to 0. The counter advances by one on each rising edge of the clock signal, unless the asynchronous clear input is activated, which resets the counter to zero.

Detailed Application Field Plans

The SN7497NG4 can be used in various applications, including: 1. Frequency division in digital communication systems 2. Clock generation in microcontrollers and microprocessors 3. Pulse generation in timing circuits 4. Event counting in industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SN7497NG4 are: - CD4018BE: 8-stage counter/divider with 10 decoded outputs - MC14060B: 14-stage binary ripple counter - 74HC393: Dual 4-bit binary ripple counter

These alternatives provide different features and pin configurations, allowing users to choose the most suitable option for their specific requirements.

Word count: 334 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN7497NG4 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN7497NG4 in technical solutions:

Q: What is SN7497NG4? A: SN7497NG4 is a specific type of integrated circuit (IC) commonly used as a shift register in digital electronics.
Q: What is the purpose of a shift register? A: A shift register is used to store and transfer data serially, allowing for efficient data manipulation and control in various applications.
Q: How many bits can SN7497NG4 handle? A: SN7497NG4 is a 4-bit shift register, meaning it can handle up to 4 bits of data at a time.
Q: What voltage levels does SN7497NG4 support? A: SN7497NG4 typically supports a wide range of voltage levels, including both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) levels.
Q: Can SN7497NG4 be cascaded to handle more than 4 bits? A: Yes, SN7497NG4 can be cascaded by connecting multiple ICs together to handle larger numbers of bits.
Q: What clock frequency can SN7497NG4 operate at? A: SN7497NG4 can typically operate at clock frequencies ranging from a few kilohertz to several megahertz, depending on the specific model and conditions.
Q: Does SN7497NG4 have any built-in error detection or correction features? A: No, SN7497NG4 is a basic shift register and does not have any built-in error detection or correction capabilities.
Q: Can SN7497NG4 be used in both synchronous and asynchronous applications? A: Yes, SN7497NG4 can be used in both synchronous and asynchronous applications, depending on the specific requirements of the system.
Q: What are some common applications of SN7497NG4? A: SN7497NG4 is commonly used in various digital systems, such as data storage, serial-to-parallel conversion, parallel-to-serial conversion, and data manipulation.
Q: Are there any special considerations when using SN7497NG4 in high-speed applications? A: Yes, in high-speed applications, it is important to consider signal integrity, proper decoupling, and noise reduction techniques to ensure reliable operation of SN7497NG4.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of SN7497NG4.